Marzena Pawlik

NameMarzena Pawlik
Job titleLecturer in Mechanical Engineering
Research instituteCollege of Science and Engineering
ORCIDhttps://orcid.org/0000-0001-8256-7016

Research outputs

Extreme temperature influence on low velocity impact damage and residual flexural properties of CFRP

Bavasso, I., Sergi, C., Ferrante, L., Pawlik, M., Lu, Y., Lampani, L., Trillo, J. and Sarasini, F. 2024. Extreme temperature influence on low velocity impact damage and residual flexural properties of CFRP. Polymer Composites. pp. 1-16. https://doi.org/10.1002/pc.29029

Experimental identification of yield surface for additively manufactured stainless steel 316L under tension–compression-torsion conditions considering its printing orientation

Kopec, M., Dubey, V. P., Pawlik, M., Wood, P. and Kowalewski, Z. L. 2024. Experimental identification of yield surface for additively manufactured stainless steel 316L under tension–compression-torsion conditions considering its printing orientation. Manufacturing Letters. 41, pp. 28-32. https://doi.org/10.1016/j.mfglet.2024.07.003

Mechanical Properties of Eco-Friendly, Lightweight Flax and Hybrid Basalt/Flax Foam Core Sandwich Panels

Marzena Pawlik, Urvashi Gunputh, Daniel Odiyi, Sarah Odofin, Huirong Le, Paul Wood, Angelo Maligno and Yiling Lu 2024. Mechanical Properties of Eco-Friendly, Lightweight Flax and Hybrid Basalt/Flax Foam Core Sandwich Panels. Materials. 17 (15), pp. 1-14. https://doi.org/10.3390/ma17153842

Mechanical Analysis of Sandwich Plates with Lattice Metal Composite Cores

Marino, F., Pawlik, Marzena and Valvano, Stefano 2024. Mechanical Analysis of Sandwich Plates with Lattice Metal Composite Cores. Spectrum of Mechanical Engineering and Operational Research. 1 (1), pp. 44-63. https://doi.org/10.31181/smeor1120244

Comparing Bio-Ester and Mineral-Oil Emulsions on Tool Wear and Surface Integrity in Finish Turning a Ni-Based Superalloy

Paul Wood, Fathi Boud, Andrew Mantle, Wayne Carter, Syed Hossain, Urvashi Gunputh, Marzena Pawlik, Yiling Lu, José Díaz-Álvarez and María Henar Miguélez 2024. Comparing Bio-Ester and Mineral-Oil Emulsions on Tool Wear and Surface Integrity in Finish Turning a Ni-Based Superalloy. Lubricants. 12 (5), pp. 1-22. https://doi.org/10.3390/lubricants12050164

Effect of Powder Bed Fusion Laser Sintering on Dimensional Accuracy and Tensile Properties of Reused Polyamide 11

Gunputh, U., Williams, G., Pawlik, M., Lu, Y. and Wood, P. 2023. Effect of Powder Bed Fusion Laser Sintering on Dimensional Accuracy and Tensile Properties of Reused Polyamide 11. Polymers. https://doi.org/10.3390/polym15234602

Prediction of carbon nanotubes reinforced interphase properties in fuzzy fibre reinforced polymer via inverse analysis and optimisation

Pawlik, M., Le, H., Wood, P. and Lu, Y. 2023. Prediction of carbon nanotubes reinforced interphase properties in fuzzy fibre reinforced polymer via inverse analysis and optimisation. Computational Material Science. 231, pp. 1-11. https://doi.org/10.1016/j.commatsci.2023.112548

Long Sump Life Effects of a Naturally Aged Bio-Ester Oil Emulsion on Tool Wear in Finish Turning a Ni-Based Superalloy

Paul Wood, Andrew Mantle, Fathi Boud, Carter, W., Gunputh, U., Pawlik, M., Lu, Y., José Díaz-Álvarez and María Henar Miguélez Garrido Long Sump Life Effects of a Naturally Aged Bio-Ester Oil Emulsion on Tool Wear in Finish Turning a Ni-Based Superalloy. Metals. https://doi.org/10.3390/met13091610

Characterisation of impact resistance of composite reinforced by hybridised carbon-flax fibres in polyfurfuryl alcohol resin

Lu, Y., Pawlik, M., Ganapathi, S. P., Wood, P., Gunputh, U. and Le, H. 2023. Characterisation of impact resistance of composite reinforced by hybridised carbon-flax fibres in polyfurfuryl alcohol resin. The 2nd International Conference on Mechanical Automation and Engineering Materials (MAEM 2023) . IOP Publishing. https://doi.org/10.1088/1742-6596/2612/1/012013

On the Lubricity and Comparative Life Cycle of Biobased Synthetic and Mineral Oil Emulsions in Machining Titanium Ti-6Al-4V at Low Cutting Speed

Wood, P., Boud, F., Carter, W., Varasteh, H., Gunputh, U., Pawlik, M., Clementson, J., Lu, Y. and Hossain, S. 2022. On the Lubricity and Comparative Life Cycle of Biobased Synthetic and Mineral Oil Emulsions in Machining Titanium Ti-6Al-4V at Low Cutting Speed. Journal of Manufacturing and material processing. 6 (6), pp. 1-16. https://doi.org/10.3390/jmmp6060154

Design and Manufacture of One-Size-Fits-All Healthcare Face Shields for the NHS During the COVID-19 Pandemic

Gunputh, U., Williams, G., Leighton, A., Carter, W., Varasteh, H., Pawlik, M., Lu, Y., Sims, R., Lyons, M., Clementson, J., Tripathi, G., Nick Chambers, Matt Roe and Wood, P. 2022. Design and Manufacture of One-Size-Fits-All Healthcare Face Shields for the NHS During the COVID-19 Pandemic. SSRN Electronic Journal. https://doi.org/10.2139/ssrn.4258668

Surface engineering of carbon fibre/epoxy composites with woven steel mesh for adhesion strength enhancement

Pawlik, M., Cheah, L.Y.Y, Gunputh, U., Le, H., Wood, P. and Lu, Y. 2022. Surface engineering of carbon fibre/epoxy composites with woven steel mesh for adhesion strength enhancement. International Journal of Adhesion and Adhesives. 114, pp. 1-8. https://doi.org/10.1016/j.ijadhadh.2022.103105

A review of in-situ grown nanocomposite coatings for titanium alloy implants

Gunputh, Urvashi Fowdar, Le, Huirong and Pawlik, Marzena 2020. A review of in-situ grown nanocomposite coatings for titanium alloy implants. Journal of Composites Science. 4 (2), p. 41. https://doi.org/10.3390/jcs4020041

Effects of surface modification and graphene nanoplatelet reinforcement on adhesive joint of aluminium alloys

Pawlik, Marzena, Lu, Yiling and Le, Huirong 2020. Effects of surface modification and graphene nanoplatelet reinforcement on adhesive joint of aluminium alloys. International Journal of Adhesion and Adhesives. https://doi.org/10.1016/j.ijadhadh.2020.102591

Effects of the graphene on the mechanical properties of fibre reinforced polymer - a numerical and experimental study

Pawlik, Marzena 2019. Effects of the graphene on the mechanical properties of fibre reinforced polymer - a numerical and experimental study. Thesis https://doi.org/10.48773/94384

Effects of the graphene nanoplatelets reinforced interphase on mechanical properties of carbon fibre reinforced polymer – A multiscale modelling study

Le, Huirong, Lu, Yiling, Pawlik, Marzena and Marzena, Pawlik 2019. Effects of the graphene nanoplatelets reinforced interphase on mechanical properties of carbon fibre reinforced polymer – A multiscale modelling study. Composites Part B: Engineering. 177, p. 107097. https://doi.org/10.1016/j.compositesb.2019.107097
  • 1385
    total views of outputs
  • 497
    total downloads of outputs
  • 4
    views of outputs this month
  • 3
    downloads of outputs this month