Effects of surface modification and graphene nanoplatelet reinforcement on adhesive joint of aluminium alloys
Journal article
Pawlik, Marzena, Lu, Yiling and Le, Huirong 2020. Effects of surface modification and graphene nanoplatelet reinforcement on adhesive joint of aluminium alloys. International Journal of Adhesion and Adhesives. https://doi.org/10.1016/j.ijadhadh.2020.102591
| Authors | Pawlik, Marzena, Lu, Yiling and Le, Huirong |
|---|---|
| Abstract | In this study, the combinative effects of surface treatments and the reinforcement of graphene nanoplatelets (GNPs) on the adhesive joint of aluminium alloy were investigated. Aluminium alloy plates were treated with acetone cleaning, grit blasting, chemical etching, and phosphoric acid anodisation (PAA) under various conditions. The effects of hydrothermal sealing of the anodised aluminium were also studied. Surface energies of the treated aluminium plates were determined using contact angle measurements. The samples were then bonded with epoxy or GNPs reinforced epoxy adhesives. The bonding strength of the aluminium joints was measured by single lap shear tests. The joint strength was significantly affected by both surface treatment and the reinforcement of GNPs. For grit blasted and PAA samples with hydrothermal sealing, the joint strength increased by 64% and 57% respectively with 0.42 wt% of GNPs. Across all surface treatments, the highest average shear strength (17.6 MPa) was achieved for PAA samples with hydrothermal sealing and the addition of GNPs followed by PAA samples with no sealing and pure epoxy (17.0 MPa). Fractal surface images were analysed, and the correlation between epoxy infiltration behaviour, surface treatments and nano-reinforcement was critically discussed. |
| Keywords | Adhesive Joint; Surface Engineering; Nanocomposites |
| Year | 2020 |
| Journal | International Journal of Adhesion and Adhesives |
| Publisher | Elsevier BV |
| ISSN | 0143-7496 |
| Digital Object Identifier (DOI) | https://doi.org/10.1016/j.ijadhadh.2020.102591 |
| Web address (URL) | http://hdl.handle.net/10545/624601 |
| https://www.elsevier.com/tdm/userlicense/1.0/ | |
| http://creativecommons.org/licenses/by-nc-nd/4.0/ | |
| hdl:10545/624601 | |
| Publication dates | 13 Mar 2020 |
| Publication process dates | |
| Deposited | 19 Mar 2020, 09:48 |
| Accepted | 11 Mar 2020 |
| Rights | Attribution-NonCommercial-NoDerivatives 4.0 International |
| Contributors | University of Derby |
| File | File Access Level Open |
| File | File Access Level Open |
| File |
Permalink -
https://repository.derby.ac.uk/item/946yz/effects-of-surface-modification-and-graphene-nanoplatelet-reinforcement-on-adhesive-joint-of-aluminium-alloys
Download files
58
total views24
total downloads1
views this month0
downloads this month
Export as
Related outputs
Extreme temperature influence on low velocity impact damage and residual flexural properties of CFRP
Bavasso, I., Sergi, C., Ferrante, L., Pawlik, M., Lu, Y., Lampani, L., Trillo, J. and Sarasini, F. 2024. Extreme temperature influence on low velocity impact damage and residual flexural properties of CFRP. Polymer Composites. pp. 1-16. https://doi.org/10.1002/pc.29029Mechanical Properties of Eco-Friendly, Lightweight Flax and Hybrid Basalt/Flax Foam Core Sandwich Panels
Marzena Pawlik, Urvashi Gunputh, Daniel Odiyi, Sarah Odofin, Huirong Le, Paul Wood, Angelo Maligno and Yiling Lu 2024. Mechanical Properties of Eco-Friendly, Lightweight Flax and Hybrid Basalt/Flax Foam Core Sandwich Panels. Materials. 17 (15), pp. 1-14. https://doi.org/10.3390/ma17153842Experimental identification of yield surface for additively manufactured stainless steel 316L under tension–compression-torsion conditions considering its printing orientation
Kopec, M., Dubey, V. P., Pawlik, M., Wood, P. and Kowalewski, Z. L. 2024. Experimental identification of yield surface for additively manufactured stainless steel 316L under tension–compression-torsion conditions considering its printing orientation. Manufacturing Letters. 41, pp. 28-32. https://doi.org/10.1016/j.mfglet.2024.07.003Mechanical Analysis of Sandwich Plates with Lattice Metal Composite Cores
Marino, F., Pawlik, Marzena and Valvano, Stefano 2024. Mechanical Analysis of Sandwich Plates with Lattice Metal Composite Cores. Spectrum of Mechanical Engineering and Operational Research. 1 (1), pp. 44-63. https://doi.org/10.31181/smeor1120244Comparing Bio-Ester and Mineral-Oil Emulsions on Tool Wear and Surface Integrity in Finish Turning a Ni-Based Superalloy
Paul Wood, Fathi Boud, Andrew Mantle, Wayne Carter, Syed Hossain, Urvashi Gunputh, Marzena Pawlik, Yiling Lu, José Díaz-Álvarez and María Henar Miguélez 2024. Comparing Bio-Ester and Mineral-Oil Emulsions on Tool Wear and Surface Integrity in Finish Turning a Ni-Based Superalloy. Lubricants. 12 (5), pp. 1-22. https://doi.org/10.3390/lubricants12050164Long Sump Life Effects of a Naturally Aged Bio-Ester Oil Emulsion on Tool Wear in Finish Turning a Ni-Based Superalloy
Paul Wood, Andrew Mantle, Fathi Boud, Carter, W., Gunputh, U., Pawlik, M., Lu, Y., José Díaz-Álvarez and María Henar Miguélez Garrido Long Sump Life Effects of a Naturally Aged Bio-Ester Oil Emulsion on Tool Wear in Finish Turning a Ni-Based Superalloy. Metals. https://doi.org/10.3390/met13091610Effect of Powder Bed Fusion Laser Sintering on Dimensional Accuracy and Tensile Properties of Reused Polyamide 11
Gunputh, U., Williams, G., Pawlik, M., Lu, Y. and Wood, P. 2023. Effect of Powder Bed Fusion Laser Sintering on Dimensional Accuracy and Tensile Properties of Reused Polyamide 11. Polymers. https://doi.org/10.3390/polym15234602Effect of Grain Structure on Machinability of LPBF Inconel 718: A Critical Review
Hama, J., Gunputh, U., Lu, Y., Wood, P. and Alvarez, J. 2023. Effect of Grain Structure on Machinability of LPBF Inconel 718: A Critical Review. 20th International Conference on Manufacturing Research, Incorporating the 37th National Conference on Manufacturing Research. IOS Press. https://doi.org/10.3233/ATDE230896Characterisation of impact resistance of composite reinforced by hybridised carbon-flax fibres in polyfurfuryl alcohol resin
Lu, Y., Pawlik, M., Ganapathi, S. P., Wood, P., Gunputh, U. and Le, H. 2023. Characterisation of impact resistance of composite reinforced by hybridised carbon-flax fibres in polyfurfuryl alcohol resin. The 2nd International Conference on Mechanical Automation and Engineering Materials (MAEM 2023) . IOP Publishing. https://doi.org/10.1088/1742-6596/2612/1/012013Prediction of carbon nanotubes reinforced interphase properties in fuzzy fibre reinforced polymer via inverse analysis and optimisation
Pawlik, M., Le, H., Wood, P. and Lu, Y. 2023. Prediction of carbon nanotubes reinforced interphase properties in fuzzy fibre reinforced polymer via inverse analysis and optimisation. Computational Material Science. 231, pp. 1-11. https://doi.org/10.1016/j.commatsci.2023.112548Microstructure Effects on the Machinability of AM-Produced Superalloys
Wood, P., Díaz-Álvarez, J., Lu, Y., Rusinek, A., Gunputh, U., Bahi, S., Díaz-Álvarez, A., Miguélez, M. H., Lu, Y., Platek, P. and Sienkiewicz, J. 2023. Microstructure Effects on the Machinability of AM-Produced Superalloys. Crystals. 13 (8), pp. 1-16. https://doi.org/10.3390/cryst13081190
Creep-Fatigue Behaviours of Sn-Ag-Cu Solder Joints in Microelectronics Applications
Depiver, Joshua Adeniyi, Sabuj, Mallik, Amalu, Emeka H and Lu, Yiling 2021. Creep-Fatigue Behaviours of Sn-Ag-Cu Solder Joints in Microelectronics Applications. Production and Manufacturing Research.Design and Manufacture of One-Size-Fits-All Healthcare Face Shields for the NHS During the COVID-19 Pandemic
Gunputh, U., Williams, G., Leighton, A., Carter, W., Varasteh, H., Pawlik, M., Lu, Y., Sims, R., Lyons, M., Clementson, J., Tripathi, G., Nick Chambers, Matt Roe and Wood, P. 2022. Design and Manufacture of One-Size-Fits-All Healthcare Face Shields for the NHS During the COVID-19 Pandemic. SSRN Electronic Journal. https://doi.org/10.2139/ssrn.4258668On the Lubricity and Comparative Life Cycle of Biobased Synthetic and Mineral Oil Emulsions in Machining Titanium Ti-6Al-4V at Low Cutting Speed
Wood, P., Boud, F., Carter, W., Varasteh, H., Gunputh, U., Pawlik, M., Clementson, J., Lu, Y. and Hossain, S. 2022. On the Lubricity and Comparative Life Cycle of Biobased Synthetic and Mineral Oil Emulsions in Machining Titanium Ti-6Al-4V at Low Cutting Speed. Journal of Manufacturing and material processing. 6 (6), pp. 1-16. https://doi.org/10.3390/jmmp6060154Surface engineering of carbon fibre/epoxy composites with woven steel mesh for adhesion strength enhancement
Pawlik, M., Cheah, L.Y.Y, Gunputh, U., Le, H., Wood, P. and Lu, Y. 2022. Surface engineering of carbon fibre/epoxy composites with woven steel mesh for adhesion strength enhancement. International Journal of Adhesion and Adhesives. 114, pp. 1-8. https://doi.org/10.1016/j.ijadhadh.2022.103105A review of in-situ grown nanocomposite coatings for titanium alloy implants
Gunputh, Urvashi Fowdar, Le, Huirong and Pawlik, Marzena 2020. A review of in-situ grown nanocomposite coatings for titanium alloy implants. Journal of Composites Science. 4 (2), p. 41. https://doi.org/10.3390/jcs4020041Numerical analysis of flow in the gap of a simplified tractor-trailer model with cross vortex trap device
charles, terrance, Yang, Zhiyin and Lu, Yiling 2019. Numerical analysis of flow in the gap of a simplified tractor-trailer model with cross vortex trap device. International Journal of Mechanical and Mechatronics Engineering. https://doi.org/10.5281/zenodo.3593100Computational Study of Flow around 2D and 3D Tandem Bluff Bodies
Charles, T., Yang, Z. and Lu, Y. 2020. Computational Study of Flow around 2D and 3D Tandem Bluff Bodies. Journal of Applied and Computational Mechanics. https://doi.org/10.22055/jacm.2020.35159.2583Assessment of Drag Reduction Devices Mounted on a Simplified Tractor-Trailer Truck Model
Charles, T., Yang, Z. and Lu, Y. 2020. Assessment of Drag Reduction Devices Mounted on a Simplified Tractor-Trailer Truck Model. Journal of Applied and Computational Mechanics. https://doi.org/10.22055/jacm.2020.34811.2475Computational Analysis of Turbulent Flow over a Bluff Body with Drag Reduction Devices
Abikan, A., Yang, Z. and Yiling Lu 2020. Computational Analysis of Turbulent Flow over a Bluff Body with Drag Reduction Devices. Journal of Applied and Computational Mechanics. https://doi.org/10.22055/jacm.2020.32667.2055Antibacterial properties of silver nanoparticles grown in situ and anchored to titanium dioxide nanotubes on titanium implant against Staphylococcus aureus
Gunputh, Urvashi Fowdar, Le, Huirong, Lawton, Kiruthika, Besinis, Alexandros, Tredwin, Christopher and Handy, Richard D. 2019. Antibacterial properties of silver nanoparticles grown in situ and anchored to titanium dioxide nanotubes on titanium implant against Staphylococcus aureus. Nanotoxicology. https://doi.org/10.1080/17435390.2019.1665727Synthesis and characterization of tungsten and barium co-doped La2Mo2O9 by sol-gel process for solid oxide fuel cells
Shao, Lingbo, Ji, Dongdong, Yang, Jie, Xie, Jinsong, Yin, Qiyi, Le, Huirong and Chang′an, Tian 2019. Synthesis and characterization of tungsten and barium co-doped La2Mo2O9 by sol-gel process for solid oxide fuel cells. Journal of Rare Earths. 37 (9), pp. 984-988. https://doi.org/10.1016/j.jre.2018.12.013Effects of the graphene nanoplatelets reinforced interphase on mechanical properties of carbon fibre reinforced polymer – A multiscale modelling study
Le, Huirong, Lu, Yiling, Pawlik, Marzena and Marzena, Pawlik 2019. Effects of the graphene nanoplatelets reinforced interphase on mechanical properties of carbon fibre reinforced polymer – A multiscale modelling study. Composites Part B: Engineering. 177, p. 107097. https://doi.org/10.1016/j.compositesb.2019.107097Facile template-free synthesis of hierarchically porous NiO hollow architectures with high-efficiency adsorptive removal of Congo red
Hu, Hanmei, Deng, Chonghai, Sun, Mei, Zhang, Kehua, Wang, Man, Xu, Jiayi and Le, Huirong 2019. Facile template-free synthesis of hierarchically porous NiO hollow architectures with high-efficiency adsorptive removal of Congo red. Journal of Porous Materials. https://doi.org/10.1007/s10934-019-00758-2Multilayered composite coatings of titanium dioxide nanotubes decorated with zinc oxide and hydroxyapatite nanoparticles: controlled release of Zn and antimicrobial properties against <em>Staphylococcus aureus</em></p>
Gunputh, Urvashi Fowdar, Le, Huirong, Besinis, Alexandros, Tredwin, Christopher and Handy, Richard 2019. Multilayered composite coatings of titanium dioxide nanotubes decorated with zinc oxide and hydroxyapatite nanoparticles: controlled release of Zn and antimicrobial properties against <em>Staphylococcus aureus</em></p>. International Journal of Nanomedicine. Volume 14, pp. 3583-3600. https://doi.org/10.2147/ijn.s199219Mechanical properties and tribological behaviour of electroless Ni–P–Cu coatings on corrosion-resistant alloys under ultrahigh contact stress with sprayed nanoparticles.
Leech, Andrew, Le, Huirong, Meng, Maozhou and Maozhou, Meng 2019. Mechanical properties and tribological behaviour of electroless Ni–P–Cu coatings on corrosion-resistant alloys under ultrahigh contact stress with sprayed nanoparticles. Tribology International. 139, pp. 59-66. https://doi.org/10.1016/j.triboint.2019.06.031Effects of the graphene on the mechanical properties of fibre reinforced polymer - a numerical and experimental study
Pawlik, Marzena 2019. Effects of the graphene on the mechanical properties of fibre reinforced polymer - a numerical and experimental study. Thesis https://doi.org/10.48773/94384Anodised TiO 2 nanotubes as a scaffold for antibacterial silver nanoparticles on titanium implants.
Gunputh, Urvashi Fowdar, Le, Huirong, Handy, Richard and Tredwin, Christopher 2018. Anodised TiO 2 nanotubes as a scaffold for antibacterial silver nanoparticles on titanium implants. Materials Science and Engineering: C. https://doi.org/10.1016/j.msec.2018.05.0743D multilayered Bi4O5Br2 nanoshells displaying excellent visible light photocatalytic degradation behaviour for resorcinol.
Hu, Hanmei, Xu, Juanjuan, Deng, Chonghai, Wang, Man, Zhou, Xiaoyu and Le, Huirong 2018. 3D multilayered Bi4O5Br2 nanoshells displaying excellent visible light photocatalytic degradation behaviour for resorcinol. Micro & Nano Letters. https://doi.org/10.1049/mnl.2017.0886Satellite-like CdS nanoparticles anchoring onto porous NiO nanoplates for enhanced visible-light photocatalytic properties.
Hu, Hanmei, Wang, Man, Deng, Chonghai, Chen, Jianli, Wang, Aiguo and Le, Huirong 2018. Satellite-like CdS nanoparticles anchoring onto porous NiO nanoplates for enhanced visible-light photocatalytic properties. Materials Letters. https://doi.org/10.1016/j.matlet.2018.04.061Modelling of the buckling of a diaphragm–spine structure for a wave energy converter
Collins, Keri M., Meng, Maozhou, Le, Huirong, Greaves, Deborah M. and Bellamy, Neil 2017. Modelling of the buckling of a diaphragm–spine structure for a wave energy converter. Materials & Design. https://doi.org/10.1016/j.matdes.2017.01.041Antibacterial activity and biofilm inhibition by surface modified titanium alloy medical implants following application of silver, titanium dioxide and hydroxyapatite nanocoatings
Besinis, Alexander, Hadi, Sanna Dara, Le, Huirong, Tredwin, Christopher and Handy, Richard 2017. Antibacterial activity and biofilm inhibition by surface modified titanium alloy medical implants following application of silver, titanium dioxide and hydroxyapatite nanocoatings. Nanotoxicology. https://doi.org/10.1080/17435390.2017.1299890Evaluation of environmental friendly Ag-PTFE composite coating for use in threaded compression fittings
Sieh, Raymond and Le, Huirong 2017. Evaluation of environmental friendly Ag-PTFE composite coating for use in threaded compression fittings. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology. https://doi.org/10.1177/1350650117719775Tribological properties of nanoclay reinforced polyimide nanocomposite coatings for alloy steels
Meng, Maozhou and Le, Huirong 2017. Tribological properties of nanoclay reinforced polyimide nanocomposite coatings for alloy steels. International Journal of Applied Ceramic Technology. https://doi.org/10.1111/ijac.12747Impacts of the gap size between two bluff bodies on the flow field within the gap
Charles, T., Lu, Y. and Yang, Z. 2017. Impacts of the gap size between two bluff bodies on the flow field within the gap. EDAS.Advanced nanocomposite coating for offshore threaded connections
Sieh, Raymond, Le, Huirong and Cree, Alistair 2015. Advanced nanocomposite coating for offshore threaded connections. 9th Nanosmat International Conference.Tailoring the interfacial adhesion of anodised TiO2 nanotubes on Ti-6Al-4V alloy for medical implants
Danookdharree, Urvashi, Le, Huirong, Handy, Richard and Tredwin, Christopher 2014. Tailoring the interfacial adhesion of anodised TiO2 nanotubes on Ti-6Al-4V alloy for medical implants.Reinforcement of sol-gel processed calcium phosphate cement using functionalised CNTs
Natesan, Kiruthika, Le, Huirong, Tredwin, Christopher and Handy, Richard 2014. Reinforcement of sol-gel processed calcium phosphate cement using functionalised CNTs.From concept to laboratory testing: the development cycle of a novel wave energy converter
Collins, Keri M., David-West, O., Le, Huirong and Greaves, Deborah M. 2014. From concept to laboratory testing: the development cycle of a novel wave energy converter. International Conference on Ocean Energy.Multi-scale analysis of moisture diffusion coupled with stress distribution in CFRP composites
Meng, Maozhou, Le, Huirong, Rizvi, M.J. and Grove, Stephen 2015. Multi-scale analysis of moisture diffusion coupled with stress distribution in CFRP composites. Composites UK.Antimicrobial silver nanoparticles in titaniumdioxide nanotubes grown on Ti-6Al-4V medical grade alloy
Danookdharree, Urvashi and Le, Huirong 2015. Antimicrobial silver nanoparticles in titaniumdioxide nanotubes grown on Ti-6Al-4V medical grade alloy. Royal Society of Chemistry.Antibacterial coating made of strongly adhered nanosilver to titania nanotubes for dental implants
Danookdharree, Urvashi, Le, Huirong, Handy, Richard and Tredwin, Christopher 2015. Antibacterial coating made of strongly adhered nanosilver to titania nanotubes for dental implants. International Association for Dental Research.Hydroxyapatite/Carbon nanotubes composite bone implants - Biocompatibility Vs Toxicity Analysis
Natesan, Kiruthika, Le, Huirong, Tredwin, Christopher and Handy, Richard 2015. Hydroxyapatite/Carbon nanotubes composite bone implants - Biocompatibility Vs Toxicity Analysis. International Association for Dental Research.The effect of initial etching sites on the morphology of TiO2 nanotubes on Ti-6Al-4V alloy
Danookdharree, Urvashi, Le, Huirong and Tredwin, Christopher 2015. The effect of initial etching sites on the morphology of TiO2 nanotubes on Ti-6Al-4V alloy. Journal of the Electrochemical Society. https://doi.org/10.1149/2.0011511jesA simplified model of surface burnishing and friction in repeated make-up process of premium tubular connections
Le, Huirong, Stewart, F. and Williams, John A. 2015. A simplified model of surface burnishing and friction in repeated make-up process of premium tubular connections. Tribology Letters. https://doi.org/10.1007/s11249-015-0562-xProcess optimisation of non-cyanide Ag–PTFE metal matrix composite electroplating for threaded connections
Sieh, Raymond, Le, Huirong and Cree, Alistair 2015. Process optimisation of non-cyanide Ag–PTFE metal matrix composite electroplating for threaded connections. Transactions of the IMF. https://doi.org/10.1080/00202967.2015.1114723Mechanics and materials in the design of a buckling diaphragm wave energy converter
Le, Huirong, Collins, Keri M., Greaves, Deborah M. and Bellamy, Neil 2015. Mechanics and materials in the design of a buckling diaphragm wave energy converter. Materials & Design. https://doi.org/10.1016/j.matdes.2015.04.041The effects of unequal compressive/tensile moduli of composites
Meng, Maozhou, Le, Huirong, Rizvi, Jahir and Grove, Stephen 2015. The effects of unequal compressive/tensile moduli of composites. Composite Structures. https://doi.org/10.1016/j.compstruct.2015.02.0643D FEA modelling of laminated composites in bending and their failure mechanisms
Meng, Maozhou, Le, Huirong, Rizvi, Jahir and Grove, Stephen 2014. 3D FEA modelling of laminated composites in bending and their failure mechanisms. Composite Structures. https://doi.org/10.1016/j.compstruct.2014.09.048A critical comparison on biocompatibility of different phases of sol–gel derived calcium phosphates as bone graft materials
Natesan, Kiruthika, Shah, W., Le, Huirong and Tredwin, Christopher 2015. A critical comparison on biocompatibility of different phases of sol–gel derived calcium phosphates as bone graft materials. Journal of Biomaterials and Tissue Engineering. https://doi.org/10.1166/jbt.2015.1364Effects of hygrothermal stress on the failure of CFRP composites
Meng, Maozhou, Rizvi, Jahir, Grove, Stephen and Le, Huirong 2015. Effects of hygrothermal stress on the failure of CFRP composites. Composite Structures. https://doi.org/10.1016/j.compstruct.2015.08.016Multi-scale modelling of moisture diffusion coupled with stress distribution in CFRP laminated composites
Meng, Maozhou, Rizvi, Jahir, Le, Huirong and Grove, Stephen 2015. Multi-scale modelling of moisture diffusion coupled with stress distribution in CFRP laminated composites. Composite Structures. https://doi.org/10.1016/j.compstruct.2015.11.028Moisture effects on the bending fatigue of laminated composites
Meng, Maozhou, Le, Huirong, Grove, Stephen and Jahir Rizvi, M. 2016. Moisture effects on the bending fatigue of laminated composites. Composite Structures. https://doi.org/10.1016/j.compstruct.2016.06.078Non-Cyanide Electrodeposited Ag–PTFE Composite Coating Using Direct or Pulsed Current Deposition
Sieh, Raymond and Le, Huirong 2016. Non-Cyanide Electrodeposited Ag–PTFE Composite Coating Using Direct or Pulsed Current Deposition. Coatings. https://doi.org/10.3390/coatings6030031Micro/Nanostructure and tribological characteristics of pressureless sintered carbon nanotubes reinforced aluminium matrix composites
Manikandan, Paramasivan, Sieh, Raymond, Elayaperumal, A., Le, Huirong and Basu, Sourajyoti 2016. Micro/Nanostructure and tribological characteristics of pressureless sintered carbon nanotubes reinforced aluminium matrix composites. Journal of Nanomaterials. https://doi.org/10.1155/2016/9843019Multiscale modelling of fluid and solute transport in soft tissues and microvessels
Lu, Yiling and Wang, Wen 2010. Multiscale modelling of fluid and solute transport in soft tissues and microvessels. Journal of Multiscale Modelling. https://doi.org/10.1142/S175697371000028XLeft atrial wall stress distribution and its relationship to electrophysiologic remodeling in persistent atrial fibrillation
Hunter, R. J., Liu, Yankai, Lu, Yiling, Wang, Wen and Schilling, R. J. 2012. Left atrial wall stress distribution and its relationship to electrophysiologic remodeling in persistent atrial fibrillation. Circulation: Arrhythmia and Electrophysiology. https://doi.org/10.1161/CIRCEP.111.965541