Determination of key mechanical properties for simulating delamination damage in impacted bonded joints of composites
Conference paper
Choudhry, R., Li, S., Day, R. and Hassan, S.F. 2015. Determination of key mechanical properties for simulating delamination damage in impacted bonded joints of composites. American Society for Composites - 30th Technical Conference, ACS 2015. American Society for Composites .
| Authors | Choudhry, R., Li, S., Day, R. and Hassan, S.F. |
|---|---|
| Type | Conference paper |
| Abstract | Non-linear dynamic FE simulations of impact event and ensuing progressive delamination and disbond failure, were performed for lap joints of composites (woven fabric reinforced phenolic) having four different overlap widths. The joints were impacted transversely using a hemispherical impactor with different velocities in the low velocity impact range. These simulations were used to explain the experimentally observed dependence of damage on overlap width and impact velocity using the concept of characteristic overlap width. The experimental observations of damage mechanisms were carried out using a combination of techniques including, through transmission photography, ultrasonic c-scan and x-ray micro tomography (XMT). Progressive damage simulations like the one described in this study require significant input material properties to run and generally little details are provided in literature about the experimental procedure to determine these values. Thus in this paper, determination of key material parameters for progressive delamination modelling in single lap joints of woven glass fabric reinforced phenolic composites, has been discussed thoroughly. |
| Keywords | Delamination damages; Experimental procedures; Low velocity impact |
| Year | 2015 |
| Conference | American Society for Composites - 30th Technical Conference, ACS 2015 |
| Publisher | American Society for Composites |
| Web address (URL) | http://www.scopus.com/inward/record.url?eid=2-s2.0-84966473438&partnerID=MN8TOARS |
| https://www.dpi-proceedings.com/index.php/ASC30/article/view/1383 | |
| Output status | Published |
| Publication dates | 2015 |
| Publication process dates | |
| Deposited | 16 Aug 2022 |
Permalink -
https://repository.derby.ac.uk/item/982y5/determination-of-key-mechanical-properties-for-simulating-delamination-damage-in-impacted-bonded-joints-of-composites
36
total views0
total downloads1
views this month0
downloads this month
Export as
Related outputs
A review of advancements in synthesis, manufacturing and properties of environment friendly biobased Polyfurfuryl Alcohol Resin and its Composites
Odiyi, D., Sharif, T., Choudhry, R., Mallik, S. and Shah S.Z.H 2023. A review of advancements in synthesis, manufacturing and properties of environment friendly biobased Polyfurfuryl Alcohol Resin and its Composites. Composites Part B: Engineering. 267, pp. 1-15. https://doi.org/10.1016/j.compositesb.2023.111034Multiscale damage modelling of notched and un-notched 3D woven composites with randomly distributed manufacturing defects
Shah, S. Z. H., Lee, J., Megat-Yusoff, P.S.M., Hussain, S. Z., Sharif, T. and Choudhry, R. 2023. Multiscale damage modelling of notched and un-notched 3D woven composites with randomly distributed manufacturing defects. Composite Structures. 318, pp. 1-17. https://doi.org/10.1016/j.compstruct.2023.117109Off-axis tensile performance of notched resin-infused thermoplastic 3D fibre-reinforced composites
Shah, S.Z.H., Megat-Yusoff, P.S.M., Sharif, T., Hussain, S.Z. and Choudhry, R.S. 2022. Off-axis tensile performance of notched resin-infused thermoplastic 3D fibre-reinforced composites. Mechanics of Materials. 175, pp. 1-9. https://doi.org/10.1016/j.mechmat.2022.104478Off-Axis and On-Axis Performance of Novel Acrylic Thermoplastic (Elium®) 3D Fibre-Reinforced Composites under Flexure Load
Shah, S.Z.H, Megat-Yusoff P.S.M., Karuppanan, S, Choudhry, R.S. and Sajid, Z. 2022. Off-Axis and On-Axis Performance of Novel Acrylic Thermoplastic (Elium®) 3D Fibre-Reinforced Composites under Flexure Load. Polymers. 14 (11), p. 2225. https://doi.org/10.3390/polym14112225Cure mechanism and kinetic prediction of biobased glass/polyfurfuryl alcohol prepreg by model-free kinetics
Odiyi, D., Sharif, T., Choudhry, R.S. and Mallik, S. 2022. Cure mechanism and kinetic prediction of biobased glass/polyfurfuryl alcohol prepreg by model-free kinetics. Thermochimica Acta. 708, pp. 1-14. https://doi.org/10.1016/j.tca.2021.179133
Compression and buckling after impact response of resin-infused thermoplastic and thermoset 3D woven composites
Shah, S.Z.H, Megat-Yusoff, P.S.M, Karuppanan, S, Choudhry, Rizwan Saeed, Din, I.U, Othman, A.R, Sharp, K and Gerard, P 2020. Compression and buckling after impact response of resin-infused thermoplastic and thermoset 3D woven composites. Composites Part B: Engineering. 207, p. 108592. https://doi.org/10.1016/j.compositesb.2020.108592Mechanical Properties and Failure Mechanisms of Novel Resin-infused Thermoplastic and Conventional Thermoset 3D Fabric Composites
Shah, Syed Zulfiqar Hussain, Megat-Yusoff, Puteri Sri Melor, Karuppanan, Saravanan, Choudhry, Rizwan Saeed, Ahmad, Faiz and Sajid, Zubair 2021. Mechanical Properties and Failure Mechanisms of Novel Resin-infused Thermoplastic and Conventional Thermoset 3D Fabric Composites. Applied Composite Materials. 29, p. 515–545. https://doi.org/10.1007/s10443-021-09980-1Multiscale damage modelling of 3D woven composites under static and impact loads
Shah, S. Z. H, Megat-Yusoff, P.S.M, Karuppanan, S, Choudhry, R.S and Sajid, Z 2021. Multiscale damage modelling of 3D woven composites under static and impact loads. Composites Part A: Applied Science and Manufacturing. 151. https://doi.org/10.1016/j.compositesa.2021.106659Experimental investigation on the quasi-static crush performance of resin-infused thermoplastic 3D fibre-reinforced composites
Shah, S. Z. H, Megat-Yusoff, P.S.M, Choudhry, R.S, Sajid, Zubair and Din, I.U 2021. Experimental investigation on the quasi-static crush performance of resin-infused thermoplastic 3D fibre-reinforced composites. Composites Communications. 28. https://doi.org/10.1016/j.coco.2021.100916Identification of an effective nondestructive technique for bond defect determination in laminate composites—A technical review
Asif, Muhammad, Khan, Muhammad A, Khan, Sohaib Z, Khan, Kamran A and Choudhry, Rizwan Saeed 2018. Identification of an effective nondestructive technique for bond defect determination in laminate composites—A technical review. Journal of Composite Materials. 52 (26), pp. 3589-3599. https://doi.org/10.1177/0021998318766595Performance comparison of resin-infused thermoplastic and thermoset 3D fabric composites under impact loading
Choudhry, Rizwan Saeed, Shah, S. Z. H., Megat-Yusoff, P.S.M., Karuppanan, S., Ahmad, F., Sajid, Z., Gerard, P. and Sharp, K. 2020. Performance comparison of resin-infused thermoplastic and thermoset 3D fabric composites under impact loading. International Journal of Mechanical Sciences. https://doi.org/10.1016/j.ijmecsci.2020.105984Buckling and strength analysis of panels with discrete stiffness tailoring
Culliford, Lucie, Choudhry, Rizwan Saeed, Butler, Richard and Rhead, Andrew T. 2019. Buckling and strength analysis of panels with discrete stiffness tailoring. Composite Structures. 234, p. 111672. https://doi.org/10.1016/j.compstruct.2019.111672A new approach for strength and stiffness prediction of discontinuous fibre reinforced composites (DFC)
Shah, S.Z.H, Choudhry, Rizwan Saeed, Mahadzir, Shuhaimi and S.Z.H., Shah 2019. A new approach for strength and stiffness prediction of discontinuous fibre reinforced composites (DFC). Composites Part B: Engineering. 183, p. 107676. https://doi.org/10.1016/j.compositesb.2019.107676A plate model for compressive strength prediction of delaminated composites
Choudhry, Rizwan Saeed, Rhead, Andrew T., Nielsen, Mark W.D. and Butler, Richard 2018. A plate model for compressive strength prediction of delaminated composites. Composite Structures. https://doi.org/10.1016/j.compstruct.2018.11.066Forming low-cost, high quality carbon tows for automotive application
Choudhry, R. 2018. Forming low-cost, high quality carbon tows for automotive application. IOP Conference Series: Materials Science and Engineering. https://doi.org/10.1088/1757-899x/406/1/012021Predicting the effect of voids on mechanical properties of woven composites
Choudhry, R. 2018. Predicting the effect of voids on mechanical properties of woven composites. IOP Conference Series: Materials Science and Engineering. https://doi.org/10.1088/1757-899x/406/1/012007