A study on finite element of pre damaged stress concentration factor for a composite laminate member with central circular.
Journal article
Ahmed, Tanveer, Choudhry, Rizwan Saeed, Shah, Atta Ur Rehman and Saeed, Hasan Aftab 2018. A study on finite element of pre damaged stress concentration factor for a composite laminate member with central circular. Journal of Mechanical Science and Technology. https://doi.org/10.1007/s12206-018-0717-4
| Authors | Ahmed, Tanveer, Choudhry, Rizwan Saeed, Shah, Atta Ur Rehman and Saeed, Hasan Aftab |
|---|---|
| Abstract | The study investigates the pre damaged stress concentration factor (SCF) for a composite laminate member (CLM) with central circular hole subjected to tensile loading. The presence of holes yields high stress concentrations in the structural members termed as stress raiser and often regarded as an important design deriver. The pre damaged SCF refers to the stress concentrations within elastic (undamaged) range of the CLM prior to the failure initiation. The traditional experimental and analytical methods for the estimation of SCF offer macro level behaviour which is not considered appropriate for CLM where lamina by lamina behaviour is more significant. A meso level finite element (FE) model is presented to capture the lamina by lamina influence on the overall SCF for a CLM using commercial software Abaqus. The paper deals with the fundamental influencing factors such as laminae orientation effect, stress distribution effect around periphery of the hole, decaying effect and ligament effect on SCF for CLM. Analytical models have been formulated to validate the FE models. The results of FE models have been found in close agreement with the analytical results. |
The study investigates the pre damaged stress concentration factor (SCF) for a composite laminate member (CLM) with central circular hole subjected to tensile loading. The presence of holes yields high stress concentrations in the structural members termed as stress raiser and often regarded as an important design deriver. The pre damaged SCF refers to the stress concentrations within elastic (undamaged) range of the CLM prior to the failure initiation. The traditional experimental and analytical methods for the estimation of SCF offer macro level behaviour which is not considered appropriate for CLM where lamina by lamina behaviour is more significant. A meso level | |
| Keywords | Composite materials; Mechanics; Stress analysis |
| Year | 2018 |
| Journal | Journal of Mechanical Science and Technology |
| Publisher | Springer |
| ISSN | 1738494X |
| 19763824 | |
| Digital Object Identifier (DOI) | https://doi.org/10.1007/s12206-018-0717-4 |
| Web address (URL) | http://hdl.handle.net/10545/622928 |
| http://creativecommons.org/licenses/by-nc-nd/4.0/ | |
| hdl:10545/622928 | |
| Publication dates | 13 Aug 2018 |
| Publication process dates | |
| Deposited | 30 Aug 2018, 12:02 |
| Rights | Archived with thanks to Journal of Mechanical Science and Technology |
| Contributors | University of Derby and National University of Science and Technology |
| File | File Access Level Open |
| File | File Access Level Open |
Permalink -
https://repository.derby.ac.uk/item/94zv4/a-study-on-finite-element-of-pre-damaged-stress-concentration-factor-for-a-composite-laminate-member-with-central-circular
Download files
34
total views0
total downloads1
views this month0
downloads this month
Export as
Related outputs
A review of advancements in synthesis, manufacturing and properties of environment friendly biobased Polyfurfuryl Alcohol Resin and its Composites
Odiyi, D., Sharif, T., Choudhry, R., Mallik, S. and Shah S.Z.H 2023. A review of advancements in synthesis, manufacturing and properties of environment friendly biobased Polyfurfuryl Alcohol Resin and its Composites. Composites Part B: Engineering. 267, pp. 1-15. https://doi.org/10.1016/j.compositesb.2023.111034Multiscale damage modelling of notched and un-notched 3D woven composites with randomly distributed manufacturing defects
Shah, S. Z. H., Lee, J., Megat-Yusoff, P.S.M., Hussain, S. Z., Sharif, T. and Choudhry, R. 2023. Multiscale damage modelling of notched and un-notched 3D woven composites with randomly distributed manufacturing defects. Composite Structures. 318, pp. 1-17. https://doi.org/10.1016/j.compstruct.2023.117109Off-axis tensile performance of notched resin-infused thermoplastic 3D fibre-reinforced composites
Shah, S.Z.H., Megat-Yusoff, P.S.M., Sharif, T., Hussain, S.Z. and Choudhry, R.S. 2022. Off-axis tensile performance of notched resin-infused thermoplastic 3D fibre-reinforced composites. Mechanics of Materials. 175, pp. 1-9. https://doi.org/10.1016/j.mechmat.2022.104478Off-Axis and On-Axis Performance of Novel Acrylic Thermoplastic (Elium®) 3D Fibre-Reinforced Composites under Flexure Load
Shah, S.Z.H, Megat-Yusoff P.S.M., Karuppanan, S, Choudhry, R.S. and Sajid, Z. 2022. Off-Axis and On-Axis Performance of Novel Acrylic Thermoplastic (Elium®) 3D Fibre-Reinforced Composites under Flexure Load. Polymers. 14 (11), p. 2225. https://doi.org/10.3390/polym14112225Cure mechanism and kinetic prediction of biobased glass/polyfurfuryl alcohol prepreg by model-free kinetics
Odiyi, D., Sharif, T., Choudhry, R.S. and Mallik, S. 2022. Cure mechanism and kinetic prediction of biobased glass/polyfurfuryl alcohol prepreg by model-free kinetics. Thermochimica Acta. 708, pp. 1-14. https://doi.org/10.1016/j.tca.2021.179133
Compression and buckling after impact response of resin-infused thermoplastic and thermoset 3D woven composites
Shah, S.Z.H, Megat-Yusoff, P.S.M, Karuppanan, S, Choudhry, Rizwan Saeed, Din, I.U, Othman, A.R, Sharp, K and Gerard, P 2020. Compression and buckling after impact response of resin-infused thermoplastic and thermoset 3D woven composites. Composites Part B: Engineering. 207, p. 108592. https://doi.org/10.1016/j.compositesb.2020.108592Mechanical Properties and Failure Mechanisms of Novel Resin-infused Thermoplastic and Conventional Thermoset 3D Fabric Composites
Shah, Syed Zulfiqar Hussain, Megat-Yusoff, Puteri Sri Melor, Karuppanan, Saravanan, Choudhry, Rizwan Saeed, Ahmad, Faiz and Sajid, Zubair 2021. Mechanical Properties and Failure Mechanisms of Novel Resin-infused Thermoplastic and Conventional Thermoset 3D Fabric Composites. Applied Composite Materials. 29, p. 515–545. https://doi.org/10.1007/s10443-021-09980-1Multiscale damage modelling of 3D woven composites under static and impact loads
Shah, S. Z. H, Megat-Yusoff, P.S.M, Karuppanan, S, Choudhry, R.S and Sajid, Z 2021. Multiscale damage modelling of 3D woven composites under static and impact loads. Composites Part A: Applied Science and Manufacturing. 151. https://doi.org/10.1016/j.compositesa.2021.106659Experimental investigation on the quasi-static crush performance of resin-infused thermoplastic 3D fibre-reinforced composites
Shah, S. Z. H, Megat-Yusoff, P.S.M, Choudhry, R.S, Sajid, Zubair and Din, I.U 2021. Experimental investigation on the quasi-static crush performance of resin-infused thermoplastic 3D fibre-reinforced composites. Composites Communications. 28. https://doi.org/10.1016/j.coco.2021.100916Identification of an effective nondestructive technique for bond defect determination in laminate composites—A technical review
Asif, Muhammad, Khan, Muhammad A, Khan, Sohaib Z, Khan, Kamran A and Choudhry, Rizwan Saeed 2018. Identification of an effective nondestructive technique for bond defect determination in laminate composites—A technical review. Journal of Composite Materials. 52 (26), pp. 3589-3599. https://doi.org/10.1177/0021998318766595Performance comparison of resin-infused thermoplastic and thermoset 3D fabric composites under impact loading
Choudhry, Rizwan Saeed, Shah, S. Z. H., Megat-Yusoff, P.S.M., Karuppanan, S., Ahmad, F., Sajid, Z., Gerard, P. and Sharp, K. 2020. Performance comparison of resin-infused thermoplastic and thermoset 3D fabric composites under impact loading. International Journal of Mechanical Sciences. https://doi.org/10.1016/j.ijmecsci.2020.105984Buckling and strength analysis of panels with discrete stiffness tailoring
Culliford, Lucie, Choudhry, Rizwan Saeed, Butler, Richard and Rhead, Andrew T. 2019. Buckling and strength analysis of panels with discrete stiffness tailoring. Composite Structures. 234, p. 111672. https://doi.org/10.1016/j.compstruct.2019.111672A new approach for strength and stiffness prediction of discontinuous fibre reinforced composites (DFC)
Shah, S.Z.H, Choudhry, Rizwan Saeed, Mahadzir, Shuhaimi and S.Z.H., Shah 2019. A new approach for strength and stiffness prediction of discontinuous fibre reinforced composites (DFC). Composites Part B: Engineering. 183, p. 107676. https://doi.org/10.1016/j.compositesb.2019.107676A plate model for compressive strength prediction of delaminated composites
Choudhry, Rizwan Saeed, Rhead, Andrew T., Nielsen, Mark W.D. and Butler, Richard 2018. A plate model for compressive strength prediction of delaminated composites. Composite Structures. https://doi.org/10.1016/j.compstruct.2018.11.066Forming low-cost, high quality carbon tows for automotive application
Choudhry, R. 2018. Forming low-cost, high quality carbon tows for automotive application. IOP Conference Series: Materials Science and Engineering. https://doi.org/10.1088/1757-899x/406/1/012021