Numerical simulation of delamination under mixed mode loading of woven fabric reinforced composites through cohesive zone elements
Conference paper
Jawadullah, Choudhry, R.S., Saeed, H.A. and Choudhry, R. 2018. Numerical simulation of delamination under mixed mode loading of woven fabric reinforced composites through cohesive zone elements. 2017 Fifth International Conference on Aerospace Science & Engineering (ICASE). Islamabad, Pakistan 14 - 16 Nov 2018 IEEE. https://doi.org/10.1109/icase.2017.8374259
| Authors | Jawadullah, Choudhry, R.S., Saeed, H.A. and Choudhry, R. |
|---|---|
| Type | Conference paper |
| Abstract | Numerical model for prediction of progressive delamination in woven fabric reinforced composite is proposed in this paper. An orthotropic model is used in which the interface is modeled as bilinear cohesive zone elements subjected to mixed mode loadings. The mixed mode loading is applied through displacements. Mesh insensitive model is obtained at a converged mesh. Mass scaling is used to run the model at high mesh density and the results are accurately found. Effect of displacement rate is studied. Load displacements graphs are obtained, and they agreed with the experimental load displacements graphs. |
| Keywords | composites; model; graphs; elements |
| Year | 2018 |
| Conference | 2017 Fifth International Conference on Aerospace Science & Engineering (ICASE) |
| Journal | 2017 5th International Conference on Aerospace Science and Engineering, ICASE 2017 |
| Publisher | IEEE |
| ISSN | 2169-3536 |
| Digital Object Identifier (DOI) | https://doi.org/10.1109/icase.2017.8374259 |
| Web address (URL) | http://www.scopus.com/inward/record.url?eid=2-s2.0-85048967049&partnerID=MN8TOARS |
| https://ieeexplore.ieee.org/abstract/document/8374259 | |
| ISBN | 978-1-5386-3601-5 |
| 978-1-5386-3602-2 | |
| Web address (URL) of conference proceedings | https://ieeexplore.ieee.org/xpl/conhome/8370365/proceeding |
| Output status | Published |
| Publication dates | 07 Jun 2018 |
| Publication process dates | |
| Deposited | 31 May 2023 |
Permalink -
https://repository.derby.ac.uk/item/9z013/numerical-simulation-of-delamination-under-mixed-mode-loading-of-woven-fabric-reinforced-composites-through-cohesive-zone-elements
30
total views0
total downloads1
views this month0
downloads this month
Export as
Related outputs
A review of advancements in synthesis, manufacturing and properties of environment friendly biobased Polyfurfuryl Alcohol Resin and its Composites
Odiyi, D., Sharif, T., Choudhry, R., Mallik, S. and Shah S.Z.H 2023. A review of advancements in synthesis, manufacturing and properties of environment friendly biobased Polyfurfuryl Alcohol Resin and its Composites. Composites Part B: Engineering. 267, pp. 1-15. https://doi.org/10.1016/j.compositesb.2023.111034Multiscale damage modelling of notched and un-notched 3D woven composites with randomly distributed manufacturing defects
Shah, S. Z. H., Lee, J., Megat-Yusoff, P.S.M., Hussain, S. Z., Sharif, T. and Choudhry, R. 2023. Multiscale damage modelling of notched and un-notched 3D woven composites with randomly distributed manufacturing defects. Composite Structures. 318, pp. 1-17. https://doi.org/10.1016/j.compstruct.2023.117109Off-axis tensile performance of notched resin-infused thermoplastic 3D fibre-reinforced composites
Shah, S.Z.H., Megat-Yusoff, P.S.M., Sharif, T., Hussain, S.Z. and Choudhry, R.S. 2022. Off-axis tensile performance of notched resin-infused thermoplastic 3D fibre-reinforced composites. Mechanics of Materials. 175, pp. 1-9. https://doi.org/10.1016/j.mechmat.2022.104478Off-Axis and On-Axis Performance of Novel Acrylic Thermoplastic (Elium®) 3D Fibre-Reinforced Composites under Flexure Load
Shah, S.Z.H, Megat-Yusoff P.S.M., Karuppanan, S, Choudhry, R.S. and Sajid, Z. 2022. Off-Axis and On-Axis Performance of Novel Acrylic Thermoplastic (Elium®) 3D Fibre-Reinforced Composites under Flexure Load. Polymers. 14 (11), p. 2225. https://doi.org/10.3390/polym14112225Cure mechanism and kinetic prediction of biobased glass/polyfurfuryl alcohol prepreg by model-free kinetics
Odiyi, D., Sharif, T., Choudhry, R.S. and Mallik, S. 2022. Cure mechanism and kinetic prediction of biobased glass/polyfurfuryl alcohol prepreg by model-free kinetics. Thermochimica Acta. 708, pp. 1-14. https://doi.org/10.1016/j.tca.2021.179133
Compression and buckling after impact response of resin-infused thermoplastic and thermoset 3D woven composites
Shah, S.Z.H, Megat-Yusoff, P.S.M, Karuppanan, S, Choudhry, Rizwan Saeed, Din, I.U, Othman, A.R, Sharp, K and Gerard, P 2020. Compression and buckling after impact response of resin-infused thermoplastic and thermoset 3D woven composites. Composites Part B: Engineering. 207, p. 108592. https://doi.org/10.1016/j.compositesb.2020.108592Mechanical Properties and Failure Mechanisms of Novel Resin-infused Thermoplastic and Conventional Thermoset 3D Fabric Composites
Shah, Syed Zulfiqar Hussain, Megat-Yusoff, Puteri Sri Melor, Karuppanan, Saravanan, Choudhry, Rizwan Saeed, Ahmad, Faiz and Sajid, Zubair 2021. Mechanical Properties and Failure Mechanisms of Novel Resin-infused Thermoplastic and Conventional Thermoset 3D Fabric Composites. Applied Composite Materials. 29, p. 515–545. https://doi.org/10.1007/s10443-021-09980-1Multiscale damage modelling of 3D woven composites under static and impact loads
Shah, S. Z. H, Megat-Yusoff, P.S.M, Karuppanan, S, Choudhry, R.S and Sajid, Z 2021. Multiscale damage modelling of 3D woven composites under static and impact loads. Composites Part A: Applied Science and Manufacturing. 151. https://doi.org/10.1016/j.compositesa.2021.106659Experimental investigation on the quasi-static crush performance of resin-infused thermoplastic 3D fibre-reinforced composites
Shah, S. Z. H, Megat-Yusoff, P.S.M, Choudhry, R.S, Sajid, Zubair and Din, I.U 2021. Experimental investigation on the quasi-static crush performance of resin-infused thermoplastic 3D fibre-reinforced composites. Composites Communications. 28. https://doi.org/10.1016/j.coco.2021.100916Identification of an effective nondestructive technique for bond defect determination in laminate composites—A technical review
Asif, Muhammad, Khan, Muhammad A, Khan, Sohaib Z, Khan, Kamran A and Choudhry, Rizwan Saeed 2018. Identification of an effective nondestructive technique for bond defect determination in laminate composites—A technical review. Journal of Composite Materials. 52 (26), pp. 3589-3599. https://doi.org/10.1177/0021998318766595Performance comparison of resin-infused thermoplastic and thermoset 3D fabric composites under impact loading
Choudhry, Rizwan Saeed, Shah, S. Z. H., Megat-Yusoff, P.S.M., Karuppanan, S., Ahmad, F., Sajid, Z., Gerard, P. and Sharp, K. 2020. Performance comparison of resin-infused thermoplastic and thermoset 3D fabric composites under impact loading. International Journal of Mechanical Sciences. https://doi.org/10.1016/j.ijmecsci.2020.105984Buckling and strength analysis of panels with discrete stiffness tailoring
Culliford, Lucie, Choudhry, Rizwan Saeed, Butler, Richard and Rhead, Andrew T. 2019. Buckling and strength analysis of panels with discrete stiffness tailoring. Composite Structures. 234, p. 111672. https://doi.org/10.1016/j.compstruct.2019.111672A new approach for strength and stiffness prediction of discontinuous fibre reinforced composites (DFC)
Shah, S.Z.H, Choudhry, Rizwan Saeed, Mahadzir, Shuhaimi and S.Z.H., Shah 2019. A new approach for strength and stiffness prediction of discontinuous fibre reinforced composites (DFC). Composites Part B: Engineering. 183, p. 107676. https://doi.org/10.1016/j.compositesb.2019.107676A plate model for compressive strength prediction of delaminated composites
Choudhry, Rizwan Saeed, Rhead, Andrew T., Nielsen, Mark W.D. and Butler, Richard 2018. A plate model for compressive strength prediction of delaminated composites. Composite Structures. https://doi.org/10.1016/j.compstruct.2018.11.066Forming low-cost, high quality carbon tows for automotive application
Choudhry, R. 2018. Forming low-cost, high quality carbon tows for automotive application. IOP Conference Series: Materials Science and Engineering. https://doi.org/10.1088/1757-899x/406/1/012021Predicting the effect of voids on mechanical properties of woven composites
Choudhry, R. 2018. Predicting the effect of voids on mechanical properties of woven composites. IOP Conference Series: Materials Science and Engineering. https://doi.org/10.1088/1757-899x/406/1/012007