Compression and buckling after impact response of resin-infused thermoplastic and thermoset 3D woven composites
Journal article
Shah, S.Z.H, Megat-Yusoff, P.S.M, Karuppanan, S, Choudhry, Rizwan Saeed, Din, I.U, Othman, A.R, Sharp, K and Gerard, P 2020. Compression and buckling after impact response of resin-infused thermoplastic and thermoset 3D woven composites. Composites Part B: Engineering. 207, p. 108592. https://doi.org/10.1016/j.compositesb.2020.108592
| Authors | Shah, S.Z.H, Megat-Yusoff, P.S.M, Karuppanan, S, Choudhry, Rizwan Saeed, Din, I.U, Othman, A.R, Sharp, K and Gerard, P |
|---|---|
| Abstract | Damage tolerance of a unique resin-infused thermoplastic (Elium) 3D fibre-reinforced composite (3D-FRC) is compared with the conventional resin-infused thermoset (Epoxy) 3D-FRC using compression after impact (CAI) tests and finite element simulations. Higher damage tolerance is demonstrated for the thermoplastic 3D-FRC as its CAI failure strength and CAI stiffness is nearly insensitive to the impact energy levels and subsequent damage, while in contrast, both these properties for the thermoset 3D-FRC get compromised significantly. The buckling performance shows a gradual, almost linear, reduction in critical buckling (44.5% reduction in 0–100 J) for the thermoplastic 3D-FRC. In comparison, the thermoset 3D-FRC shows a much steeper drop in critical buckling, which becomes more pronounced for the higher impact energy cases (84.5% reduction in 0–100 J). It is postulated that the local plastic deformation of the thermoplastic matrix at the impact site as well as better interfacial adhesion is responsible for its better damage tolerance. |
| Keywords | Compression after impact (CAI); Thermoplastic; Thermoset; Damage tolerance; Buckling; 3D composite |
| Year | 2020 |
| Journal | Composites Part B: Engineering |
| Journal citation | 207, p. 108592 |
| Publisher | Elsevier |
| ISSN | 13598368 |
| Digital Object Identifier (DOI) | https://doi.org/10.1016/j.compositesb.2020.108592 |
| Web address (URL) | http://hdl.handle.net/10545/625576 |
| hdl:10545/625576 | |
| Publication dates | 29 Dec 2020 |
| Publication process dates | |
| Deposited | 01 Feb 2021, 11:33 |
| Accepted | 18 Dec 2020 |
| Rights | © 2020 Elsevier Ltd. All rights reserved. |
| Contributors | Universiti Teknologi PETRONAS, 32610, Bandar Seri Iskandar, Perak, Malaysia, University of Derby, National University of Sciences and Technology (NUST), Islamabad, Pakistan, TexTech Industries, Inc, 1 City Center, Portland, ME, USA and ARKEMA, Groupement de Recherche de Lacq, F-64170, Lacq, France |
| File | File Access Level Open |
| File |
Permalink -
https://repository.derby.ac.uk/item/94736/compression-and-buckling-after-impact-response-of-resin-infused-thermoplastic-and-thermoset-3d-woven-composites
Download files
46
total views18
total downloads3
views this month1
downloads this month
Export as
Related outputs
A review of advancements in synthesis, manufacturing and properties of environment friendly biobased Polyfurfuryl Alcohol Resin and its Composites
Odiyi, D., Sharif, T., Choudhry, R., Mallik, S. and Shah S.Z.H 2023. A review of advancements in synthesis, manufacturing and properties of environment friendly biobased Polyfurfuryl Alcohol Resin and its Composites. Composites Part B: Engineering. 267, pp. 1-15. https://doi.org/10.1016/j.compositesb.2023.111034Multiscale damage modelling of notched and un-notched 3D woven composites with randomly distributed manufacturing defects
Shah, S. Z. H., Lee, J., Megat-Yusoff, P.S.M., Hussain, S. Z., Sharif, T. and Choudhry, R. 2023. Multiscale damage modelling of notched and un-notched 3D woven composites with randomly distributed manufacturing defects. Composite Structures. 318, pp. 1-17. https://doi.org/10.1016/j.compstruct.2023.117109Off-axis tensile performance of notched resin-infused thermoplastic 3D fibre-reinforced composites
Shah, S.Z.H., Megat-Yusoff, P.S.M., Sharif, T., Hussain, S.Z. and Choudhry, R.S. 2022. Off-axis tensile performance of notched resin-infused thermoplastic 3D fibre-reinforced composites. Mechanics of Materials. 175, pp. 1-9. https://doi.org/10.1016/j.mechmat.2022.104478Off-Axis and On-Axis Performance of Novel Acrylic Thermoplastic (Elium®) 3D Fibre-Reinforced Composites under Flexure Load
Shah, S.Z.H, Megat-Yusoff P.S.M., Karuppanan, S, Choudhry, R.S. and Sajid, Z. 2022. Off-Axis and On-Axis Performance of Novel Acrylic Thermoplastic (Elium®) 3D Fibre-Reinforced Composites under Flexure Load. Polymers. 14 (11), p. 2225. https://doi.org/10.3390/polym14112225Cure mechanism and kinetic prediction of biobased glass/polyfurfuryl alcohol prepreg by model-free kinetics
Odiyi, D., Sharif, T., Choudhry, R.S. and Mallik, S. 2022. Cure mechanism and kinetic prediction of biobased glass/polyfurfuryl alcohol prepreg by model-free kinetics. Thermochimica Acta. 708, pp. 1-14. https://doi.org/10.1016/j.tca.2021.179133Mechanical Properties and Failure Mechanisms of Novel Resin-infused Thermoplastic and Conventional Thermoset 3D Fabric Composites
Shah, Syed Zulfiqar Hussain, Megat-Yusoff, Puteri Sri Melor, Karuppanan, Saravanan, Choudhry, Rizwan Saeed, Ahmad, Faiz and Sajid, Zubair 2021. Mechanical Properties and Failure Mechanisms of Novel Resin-infused Thermoplastic and Conventional Thermoset 3D Fabric Composites. Applied Composite Materials. 29, p. 515–545. https://doi.org/10.1007/s10443-021-09980-1Multiscale damage modelling of 3D woven composites under static and impact loads
Shah, S. Z. H, Megat-Yusoff, P.S.M, Karuppanan, S, Choudhry, R.S and Sajid, Z 2021. Multiscale damage modelling of 3D woven composites under static and impact loads. Composites Part A: Applied Science and Manufacturing. 151. https://doi.org/10.1016/j.compositesa.2021.106659Experimental investigation on the quasi-static crush performance of resin-infused thermoplastic 3D fibre-reinforced composites
Shah, S. Z. H, Megat-Yusoff, P.S.M, Choudhry, R.S, Sajid, Zubair and Din, I.U 2021. Experimental investigation on the quasi-static crush performance of resin-infused thermoplastic 3D fibre-reinforced composites. Composites Communications. 28. https://doi.org/10.1016/j.coco.2021.100916
Identification of an effective nondestructive technique for bond defect determination in laminate composites—A technical review
Asif, Muhammad, Khan, Muhammad A, Khan, Sohaib Z, Khan, Kamran A and Choudhry, Rizwan Saeed 2018. Identification of an effective nondestructive technique for bond defect determination in laminate composites—A technical review. Journal of Composite Materials. 52 (26), pp. 3589-3599. https://doi.org/10.1177/0021998318766595Performance comparison of resin-infused thermoplastic and thermoset 3D fabric composites under impact loading
Choudhry, Rizwan Saeed, Shah, S. Z. H., Megat-Yusoff, P.S.M., Karuppanan, S., Ahmad, F., Sajid, Z., Gerard, P. and Sharp, K. 2020. Performance comparison of resin-infused thermoplastic and thermoset 3D fabric composites under impact loading. International Journal of Mechanical Sciences. https://doi.org/10.1016/j.ijmecsci.2020.105984Buckling and strength analysis of panels with discrete stiffness tailoring
Culliford, Lucie, Choudhry, Rizwan Saeed, Butler, Richard and Rhead, Andrew T. 2019. Buckling and strength analysis of panels with discrete stiffness tailoring. Composite Structures. 234, p. 111672. https://doi.org/10.1016/j.compstruct.2019.111672A new approach for strength and stiffness prediction of discontinuous fibre reinforced composites (DFC)
Shah, S.Z.H, Choudhry, Rizwan Saeed, Mahadzir, Shuhaimi and S.Z.H., Shah 2019. A new approach for strength and stiffness prediction of discontinuous fibre reinforced composites (DFC). Composites Part B: Engineering. 183, p. 107676. https://doi.org/10.1016/j.compositesb.2019.107676A plate model for compressive strength prediction of delaminated composites
Choudhry, Rizwan Saeed, Rhead, Andrew T., Nielsen, Mark W.D. and Butler, Richard 2018. A plate model for compressive strength prediction of delaminated composites. Composite Structures. https://doi.org/10.1016/j.compstruct.2018.11.066Forming low-cost, high quality carbon tows for automotive application
Choudhry, R. 2018. Forming low-cost, high quality carbon tows for automotive application. IOP Conference Series: Materials Science and Engineering. https://doi.org/10.1088/1757-899x/406/1/012021Predicting the effect of voids on mechanical properties of woven composites
Choudhry, R. 2018. Predicting the effect of voids on mechanical properties of woven composites. IOP Conference Series: Materials Science and Engineering. https://doi.org/10.1088/1757-899x/406/1/012007