A lean thinking and simulation-based approach for the improvement of routing operations
Journal article
Villarreal, Bernardo, Garza-Reyes, Jose Arturo and Kumar, Vikas 2016. A lean thinking and simulation-based approach for the improvement of routing operations. Industrial Management & Data Systems. https://doi.org/10.1108/IMDS-09-2015-0385
| Authors | Villarreal, Bernardo, Garza-Reyes, Jose Arturo and Kumar, Vikas |
|---|---|
| Abstract | Purpose: The improvement of routing operations performance has been of great concern for organisations. This has led to the development of alternative lean-based methods, however the literature research on the applications of lean thinking in the transportation sector is still considered rather limited. Therefore, this paper presents a lean thinking and simulation-based approach to improve the efficiency of warehousing and routing operations. Design/Methodology/Approach: The paper reviews the existing literature in the area of lean transportation and then presents and applies a novel approach to improve the vehicle routing operations of a Mexican firm. The proposed approach suggests the classification of wastes into those relevant to transport operations, their identification through a Transportation Value Stream Mapping (TVSM) study, and the use of the Transportation Overall Vehicle Effectiveness (TOVE) index for the measure of the overall performance of the transport operations. Findings: The results obtained from the case study indicate that the proposed approach is an effective alternative for the improvement of vehicle routing operations as the number of routes decreased from 30 to 22 and the distance travelled by 32%. Similarly, the average number of clients served by each route increased by 23% as well as the TOVE index increased from 6.9% to 19.3%. The TOVE component measures of vehicle performance and operating availability efficiencies also increased significantly while quality issues, in the form of number of customers not served per route, were reduced from 6 to 0. Originality/value: The improvement of routing operations performance has been traditionally addressed through operations research and mathematical modelling approaches. This paper presents an alternative and novel lean thinking and simulation-based approach to improve the efficiency of routing operations. |
Purpose: The improvement of routing operations performance has been of great concern for organisations. This has led to the development of alternative lean-based methods, however the literature research on the applications of lean thinking in the transportation sector is still considered rather limited. Therefore, this paper presents a lean thinking and simulation-based approach to improve the efficiency of warehousing and routing operations. Design/Methodology/Approach: The paper reviews the existing literature in the area of lean transportation and then presents and applies a novel approach to improve the vehicle routing operations of a Mexican firm. The proposed approach suggests the classification of wastes into those relevant to transport operations, their identification through a Transportation Value Stream Mapping (TVSM) study, and the use of the Transportation Overall Vehicle Effectiveness (TOVE) index for the measure of the overall performance of the transport operations. Findings: The results obtained from the case study indicate that the proposed approach is an effective alternative for the improvement of vehicle routing operations as the number of routes decreased from 30 to 22 and the distance travelled by 32%. Similarly, the average number of clients served by each route increased by 23% as well as the TOVE index increased from 6.9% to 19.3%. The TOVE component measures of vehicle performance and operating availability efficiencies also increased significantly while quality issues, in the form of number of customers not served per route, were reduced from 6 to 0. Originality/value: The improvement of routing operations performance has been traditionally addressed through operations research and mathematical modelling approaches. This paper presents an alternative and novel lean thinking and simulation-based approach to improve the efficiency of routing operations. | |
| Keywords | Transportation waste elimination; Lean routing; Value stream map; Transportation efficiency; Vehicle routing problem |
| Year | 2016 |
| Journal | Industrial Management & Data Systems |
| Publisher | Emerald |
| ISSN | 0263-5577 |
| Digital Object Identifier (DOI) | https://doi.org/10.1108/IMDS-09-2015-0385 |
| Web address (URL) | http://hdl.handle.net/10545/601226 |
| hdl:10545/601226 | |
| Publication dates | 2016 |
| Publication process dates | |
| Deposited | 11 Mar 2016, 15:35 |
| Contributors | University of Derby |
| File | |
| File | File Access Level Open |
Permalink -
https://repository.derby.ac.uk/item/931wq/a-lean-thinking-and-simulation-based-approach-for-the-improvement-of-routing-operations
Download files
83
total views52
total downloads0
views this month0
downloads this month
Export as
Related outputs
Prioritizing Industry 4.0 Technologies (I4.0T) through an Interpretive Ranking Process (IRP): A Design and Manufacturing Perspective
Bhadu, J., Bhamu, J., Singh, D., Kuar, P., Garza-Reyes, J.A. and Kumar Phanden, R. 2024. Prioritizing Industry 4.0 Technologies (I4.0T) through an Interpretive Ranking Process (IRP): A Design and Manufacturing Perspective. International Journal on Interactive Design and Manufacturing. pp. 1-18. https://doi.org/10.1007/s12008-024-02126-0Implementing Industry 4.0 and Circular Economy through the Developmental Culture Perspective – Driving a Competitive Advantage in the Manufacturing Industry
Piyathanavong, V., Olapiriyakul, S., Garza-Reyes, J.A., Kumar, V.,, Huynh, V.N. and Karnjana, J. 2024. Implementing Industry 4.0 and Circular Economy through the Developmental Culture Perspective – Driving a Competitive Advantage in the Manufacturing Industry. Business Strategy and the Environment. https://doi.org/10.1002/bse.3967Decarbonised closed-loop supply chains resilience: examining the impact of COVID-19 toward risk mitigation by a fuzzy multi-layer decision-making framework
Hannan Amoozad Mahdiraji, Fatemeh Yaftiyan, Jose Arturo Garza-Reyes, Seyed Hossein Razavi Hajiagha and Yigit Kazancoglu 2024. Decarbonised closed-loop supply chains resilience: examining the impact of COVID-19 toward risk mitigation by a fuzzy multi-layer decision-making framework. Annals of Operations Research. pp. 1-45. https://doi.org/10.1007/s10479-024-06093-3A review of Industry 5.0: From Key Facets to a Conceptual Implementation Framework
Kaswan, M.S., Chaudhary, R., Jose Arturo Garza-Reyes and Singh, A. 2024. A review of Industry 5.0: From Key Facets to a Conceptual Implementation Framework. International Journal of Quality and Reliability Management. pp. 1-28. https://doi.org/10.1108/IJQRM-01-2024-0030Integrating Lean Six Sigma with Life Cycle and Value Stream Level of RAMI 4.0
Ozkan-Ozen, Y.D, Garza-Reyes, J.A. and Kazancoglu, Y. 2024. Integrating Lean Six Sigma with Life Cycle and Value Stream Level of RAMI 4.0. Quality Management Journal. pp. 1-17. https://doi.org/10.1080/10686967.2024.2394400Green Lean Six Sigma Practices: A Scale Development and Measurement Model from an Engineers Perspective
Gholami, H., Lee, J.K.Y., Garza-Reyes, J.A., and Salameh, A.A. 2024. Green Lean Six Sigma Practices: A Scale Development and Measurement Model from an Engineers Perspective. Journal of Manufacturing Technology Management. pp. 1-24. https://doi.org/10.1108/JMTM-12-2023-0555Operational Practices for Integrating Lean and Industry 4.0 - a Dynamic Capabilities Perspective
Komkowski, T., Sony, M., Antony, J., Lizarelli, F.L., Garza-Reyes, J.A. and Tortorella, G.L. 2024. Operational Practices for Integrating Lean and Industry 4.0 - a Dynamic Capabilities Perspective. International Journal of Production Research. pp. 1-21. https://doi.org/10.1080/00207543.2024.2381127Embracing drones and the Internet of drones systems in manufacturing – An exploration of obstacles
Askerbekov, D, Garza-Reyes, J.A, Ghatak, R.R., Joshi, R., Kandasamy, J. and De Mattos Nascimento, D.L. 2024. Embracing drones and the Internet of drones systems in manufacturing – An exploration of obstacles. Technology in Society. 78, pp. 1-16. https://doi.org/10.1016/j.techsoc.2024.102648The Sustainable Configuration of a Circular Economy in the Agri-food Supply Chain: A Case Study of the Sugar Cane Supply Chain
Ahmed, R., He, Q. and Jose Arturo Garza-Reyes 2024. The Sustainable Configuration of a Circular Economy in the Agri-food Supply Chain: A Case Study of the Sugar Cane Supply Chain. Management of Environmental Quality. pp. 1-21. https://doi.org/10.1108/MEQ-09-2023-0313The implementation of Lean Six Sigma for the optimization of Robotic Process Automation systems in financial service operations
Lameijer, B., de Vries, E., Antony, J., Garza-Reyes, J. and Sony, M. 2024. The implementation of Lean Six Sigma for the optimization of Robotic Process Automation systems in financial service operations. Business Process Management Journal. 30 (8), pp. 232-259. https://doi.org/10.1108/BPMJ-08-2023-0640The interplay effects of digital technologies, green integration, and green innovation on food supply chain sustainable performance: An organizational information processing theory perspective
Sanjeev Yadav, Ashutosh Samadhiya, Anil Kumar, Sunil Luthra, Vikas Kumar, Jose Arturo Garza-Reyes and Arvind Upadhyay 2024. The interplay effects of digital technologies, green integration, and green innovation on food supply chain sustainable performance: An organizational information processing theory perspective. Technology in Society. 77, pp. 1-12. https://doi.org/10.1016/j.techsoc.2024.102585Adopting Quality Management Practices in the Industry 4.0 Era: An Investigation into the Challenges
Prini Fadilasari, D., Ghatak, R.R., Garza-Reyes, J.A., Joshi, R. and Kandasamy, J. 2024. Adopting Quality Management Practices in the Industry 4.0 Era: An Investigation into the Challenges. Total Quality Management & Business Excellence. pp. 1-26. https://doi.org/10.1080/14783363.2024.2354840The Effect of Green Supply Chain Management Practices on Carbon Neutral Supply Chain Performance: The Mediating Role of Logistics Ecocentricity
Naz, F., Samadhiya, A., Kumar, A., Garza-Reyes, J. A., Kazancoglu, Y., Kumar, V. and Upadhyay, A. 2024. The Effect of Green Supply Chain Management Practices on Carbon Neutral Supply Chain Performance: The Mediating Role of Logistics Ecocentricity. Journal of Manufacturing Technology Management. pp. 1-22. https://doi.org/10.1108/JMTM-09-2023-0401Integrating Lean Six Sigma and Industry 4.0: developing a design science research-based LSS4.0 framework for operational excellence
Skalli, D., Cherrafi, A., Charkaoui, A., Chiarini, A., Shokri, A., Antony, J., Garza-Reyes, J. and Foster, M. 2024. Integrating Lean Six Sigma and Industry 4.0: developing a design science research-based LSS4.0 framework for operational excellence. Production Planning and Control: The Management of Operations. pp. 1-28. https://doi.org/10.1080/09537287.2024.2341698Blockchain for Secure Payments: A Bibliometric Review
Jain, V., Mehrotra, R., Garza-Reyes, J., Tiwari, R. and Chand, K. 2024. Blockchain for Secure Payments: A Bibliometric Review. in: Kumar, A., Ahuja, N. J., Kaushik, K., Tomar, D. S. and Khan, S. B. (ed.) Sustainable Security Practices Using Blockchain, Quantum and Post-Quantum Technologies for Real Time Applications Singapore Springer. pp. 287–298Unlocking the potential: a study on the role of operational excellence in Oman’s energy sector
Al Zaabi, Y., Antony, J., Garza-Reyes, J., Tortorella, G.L., Sony, M. and Jayaraman, R. 2024. Unlocking the potential: a study on the role of operational excellence in Oman’s energy sector. International Journal of Quality and Reliability Management. pp. 1-26. https://doi.org/10.1108/IJQRM-02-2024-0067A systematic literature review with bibliometric analysis of Quality 4.0
Alsadi, J., Alkhatib, F., Tortorella, G., Garza-Reyes, J.A. and Cudney, E. 2024. A systematic literature review with bibliometric analysis of Quality 4.0. The TQM Journal. pp. 1-25. https://doi.org/10.1108/TQM-02-2024-0050Integration of Blockchain and Lean Six Sigma approach for operational excellence: A proposed model
Rathi, R., Singh, M., Antony, J., Garza-Reyes, J.A, Goyat, R. and Shokri, A. 2024. Integration of Blockchain and Lean Six Sigma approach for operational excellence: A proposed model. International Journal of Lean Six Sigma. pp. 1-22. https://doi.org/10.1108/IJLSS-07-2022-0148Industrial revolution and smart farming: a critical analysis of research components in Industry 4.0
Isha Batra, Chetan Sharma, Arun Malik, Shamneesh Sharma, Mahender Singh Kaswan and Jose Arturo Garza-Reyes 2024. Industrial revolution and smart farming: a critical analysis of research components in Industry 4.0. The TQM Journal. pp. 1-29. https://doi.org/10.1108/tqm-10-2023-0317Global perspectives on operational excellence: unveiling critical failure factors and sustainable pathways
Jiju Antony, Michael Sony, Raja Jayaraman, Vikas Swarnakar, Guilherme da Luz Tortorella, Jose Arturo Garza-Reyes, Rajeev Rathi, Leopoldo Gutierrez, Olivia McDermott and Bart Alex Lameijer 2024. Global perspectives on operational excellence: unveiling critical failure factors and sustainable pathways. International Journal of Quality & Reliability Management. pp. 1-23. https://doi.org/10.1108/ijqrm-01-2024-0013Business strategy and innovative models in the fashion industry: clothing leasing as a driver of sustainability
Barletta, M., D’Adamo, I., Garza-Reyes, J. and Gastald, M. 2024. Business strategy and innovative models in the fashion industry: clothing leasing as a driver of sustainability. Business Strategy and the Environment. pp. 1-14. https://doi.org/10.1002/bse.3723The Improvement of Block Chain Technology Simulation in Supply Chain Management (Case Study: Pesticide Company)
Gozali, L.,, Kristina, H.J., Yosua, A., Zagloel, T.Y.M, Masrom, M., Susanto, S., Tanujaya, H., Irawan, A.P., Gunadi, A., Kumar, V., Garza-Reyes, J., Beng, J.T. and Daywin, F. J. 2024. The Improvement of Block Chain Technology Simulation in Supply Chain Management (Case Study: Pesticide Company). Scientific Reports. 14 (3784), pp. 1-18. https://doi.org/10.1038/s41598-024-53694-wCompromising allocation for optimising agri-food supply chain distribution network: a fuzzy stochastic programming approach
Gupta, S., Chaudhary, S., Kumar Singh, R, Garza-Reyes, J. and Kumar, V. 2024. Compromising allocation for optimising agri-food supply chain distribution network: a fuzzy stochastic programming approach. International Journal of System Assurance Engineering and Management . pp. 1-23. https://doi.org/10.1007/s13198-023-02234-2Sustainability and Industry 4.0: The role of social, environmental and technological factors in the development of digital manufacturing
Kumar Mangla, S, Luthra, S, Garza-Reyes, J., Chiappetta Jabbour, C.J. and Brem, A. 2024. Sustainability and Industry 4.0: The role of social, environmental and technological factors in the development of digital manufacturing. Technological Forecasting and Social Change. pp. 1-6. https://doi.org/10.1016/j.techfore.2024.123223Unlock the Potential: Unveiling the Untapped Possibilities of Blockchain Technology in Revolu-tionizing Internet of Medical Things-based Environments through Systematic Review and Future Research Propositions
Samadhiya, A., Kumar, A.,, Garza-Reyes, J., Luthra, S. and del Olmo García, F. 2024. Unlock the Potential: Unveiling the Untapped Possibilities of Blockchain Technology in Revolu-tionizing Internet of Medical Things-based Environments through Systematic Review and Future Research Propositions. Information Sciences. 661, pp. 1-18. https://doi.org/10.1016/j.ins.2024.120140Investigating the barriers to Quality 4.0 adoption in the Indian manufacturing sector: insights and implications for industry and policy-making
Ranjit Roy Ghatak and Jose Arturo Garza-Reyes 2024. Investigating the barriers to Quality 4.0 adoption in the Indian manufacturing sector: insights and implications for industry and policy-making. International Journal of Quality & Reliability Management. https://doi.org/10.1108/ijqrm-09-2023-0277An exploration of operational excellence methodologies implementation in the logistics sectors: a global study
Trakulsunti, Y., Antony, J., Garza-Reyes, J., Tortorella, G., Chuayjan, W. and Foster, M. 2024. An exploration of operational excellence methodologies implementation in the logistics sectors: a global study. TQM Journal. pp. 1-30. https://doi.org/10.1108/TQM-10-2023-0313An assessment framework to evaluate the critical success factors to Quality 4.0 transition in developing countries: a case experience of sustainable performance of Indian manufacturers
Sudhanshu Joshi, Manu Sharma, Sunil Luthra, Jose Arturo Garza-Reyes and Ramesh Anbanandam 2023. An assessment framework to evaluate the critical success factors to Quality 4.0 transition in developing countries: a case experience of sustainable performance of Indian manufacturers. The TQM Journal. pp. 1-51. https://doi.org/10.1108/tqm-10-2023-0311A C-LEAN Framework for Deploying Circular Economy in Manufacturing SMEs
Nadeem, S., Garza-Reyes, J.A. and Anosike, A.I. 2023. A C-LEAN Framework for Deploying Circular Economy in Manufacturing SMEs. Production Planning and Control: The Management of Operations. pp. 1-21. https://doi.org/10.1080/09537287.2023.2294307Integrating Lean Management with Industry 4.0: An Explorative Dynamic Capabilities Theory Perspective
Komkowski, T., Antony, J., Jose Arturo Garza-Reyes, Tortorella, G.L. and Pongboonchai-Empl, T. 2023. Integrating Lean Management with Industry 4.0: An Explorative Dynamic Capabilities Theory Perspective. Production Planning and Control: The Management of Operations. pp. 1-19. https://doi.org/10.1080/09537287.2023.2294297Interplay between Absorptive Capacity, Analytics Competence and Sustainable Economic Per-formance of MSMEs in Supply Chain: The Mediating Role of Risk Resilience
Mishra, R.,, Kumar Singh, R. and Jose Arturo Garza-Reyes 2023. Interplay between Absorptive Capacity, Analytics Competence and Sustainable Economic Per-formance of MSMEs in Supply Chain: The Mediating Role of Risk Resilience. Annals of Operations Research. pp. 1-25. https://doi.org/10.1007/s10479-023-05733-4A taxonomy of critical factors towards Sustainable Operations and Supply Chain Management 4.0 in developing countries– A systematic review and fuzzy group decision-making
Gusmão Caiado, R.G., Scavarda, L.F., Vidal, G., De Mattos Nascimento D.L., and Garza-Reyes, J. 2023. A taxonomy of critical factors towards Sustainable Operations and Supply Chain Management 4.0 in developing countries– A systematic review and fuzzy group decision-making. Operations Management Research. pp. 1-24. https://doi.org/10.1007/s12063-023-00430-8Exploring Critical Success Factors for LSS 4.0 Implementation: A Combined Systematic Literature Review and Interpretive Structural Modelling Approach
Skalli, D., Charkaoui, A., Cherrafi, A. and Garza-Reyes, J. 2023. Exploring Critical Success Factors for LSS 4.0 Implementation: A Combined Systematic Literature Review and Interpretive Structural Modelling Approach. in: Rathi, R., Garza-Reyes, J., Kaswan, M. S. and Singh, M. (ed.) Lean Six Sigma 4.0 for Operational Excellence Under the Industry 4.0 Transformation Oxfordshire CRC Press/ Routledge. pp. 1-18The Role of Agri-Food 4.0 in Climate-Smart Farming for Controlling Climate Change-related Risks: A Business Perspective Analysis
Kazancoglu, Y., Lafci, C., Kumar, A., Garza-Reyes, J.A. and Berberoglu, Y. 2023. The Role of Agri-Food 4.0 in Climate-Smart Farming for Controlling Climate Change-related Risks: A Business Perspective Analysis. Business Strategy and the Environment. https://doi.org/10.1002/bse.3629Exploring Lean Team Development from the Tuckman's Model Perspective
Zirar, A., Muhammad, N., Upadhyay, A., Kumar, A., and Garza-Reyes, J.A. 2023. Exploring Lean Team Development from the Tuckman's Model Perspective. Production Planning & Control. pp. 1-23. https://doi.org/10.1080/09537287.2023.2275693A Systematic Review of Lean Implementation Frameworks and Roadmaps: Lessons Learned the Way Forward
Mamoojee-Khatib, H., Antony, J., Teeroovengadum, V., Garza-Reyes, J., Tortorella, G., Foster, M. and Cudney, E. 2023. A Systematic Review of Lean Implementation Frameworks and Roadmaps: Lessons Learned the Way Forward. The TQM Journal. pp. 1-24. https://doi.org/10.1108/TQM-09-2023-0280Assessing Risk and Sustainability Factors in Spice Supply Chain Management
Kumar, V, Raj, R.,, Verma, P., Garza-Reyes, J. and Shah. B. 2023. Assessing Risk and Sustainability Factors in Spice Supply Chain Management. Operations Management Research. pp. 1-20. https://doi.org/10.1007/s12063-023-00424-6The Influence of Artificial Intelligence Techniques on Disruption Management: Does Supply Chain Dynamism Matter?
Samadhiya, A., Yadav., S., Kumar, A., Majumdar, A., Luthra, S., Garza-Reyes, J.A. and Upadhyay, A. 2023. The Influence of Artificial Intelligence Techniques on Disruption Management: Does Supply Chain Dynamism Matter? Technology in Society. pp. 1-45. https://doi.org/10.1016/j.techsoc.2023.102394Why do Process Improvement Projects Fail in Organizations? A Review and Future Research Agenda
Bader, M., Antony, J., Jayaraman, R, Swarnakar, V., Goonetilleke, R., Maalouf, M., Garza-Reyes, J. and Linderman, K. 2023. Why do Process Improvement Projects Fail in Organizations? A Review and Future Research Agenda. International Journal of Lean Six Sigma. pp. 1-49. https://doi.org/10.1108/IJLSS-07-2023-0126Adoption of Industry 4.0 in Different Sectors: A Structural Review using Natural Language Processing
Sharma, S., Malik, A., Sharma, C., Batra, I., Kaswan, M.S. and Garza-Reyes. J.A. 2023. Adoption of Industry 4.0 in Different Sectors: A Structural Review using Natural Language Processing. International Journal on Interactive Design and Manufacturing. pp. 1-23. https://doi.org/10.1007/s12008-023-01550-yRevolutionizing Healthcare Organizations with Operational Excellence and Healthcare 4.0: A Systematic Review of the State-of-the-Art Literature
Detwal, P., Agrawal, R., Samadhiya, A., Kumar, A. and Garza-Reyes, J.A. 2023. Revolutionizing Healthcare Organizations with Operational Excellence and Healthcare 4.0: A Systematic Review of the State-of-the-Art Literature. International Journal of Lean Six Sigma. pp. 1-23. https://doi.org/10.1108/IJLSS-04-2023-0061An Environmental-Based Perspective Framework: Integrating IoT Technology into a Sustainable Automotive Supply Chain
El Jaouhari, A., Arif, J., Samadhiya, A., Kumar, A. and Garza-Reyes, J.A 2023. An Environmental-Based Perspective Framework: Integrating IoT Technology into a Sustainable Automotive Supply Chain. Benchmarking: An International Journal. pp. 1-35. https://doi.org/10.1108/BIJ-05-2023-0322Measuring the readiness level for Kaizen projects: A multi-layer Bayesian decision-making framework
Amoozad Mahdiraji, H, Sharifpour Arabi, H, Garza-Reyes, J. and Jabbar, A. 2023. Measuring the readiness level for Kaizen projects: A multi-layer Bayesian decision-making framework. TQM Journal. pp. 1-22. https://doi.org/10.1108/TQM-06-2023-0166Systematic review of Industry 5.0 from main aspects to the execution status
Kumar, U., Kaswan, M.S., Kumar, R., Chaudhary, R., Garza-Reyes, J., Rathi, R. and Joshi, R. 2023. Systematic review of Industry 5.0 from main aspects to the execution status. The TQM Journal. pp. 1-24. https://doi.org/10.1108/TQM-06-2023-0183/full/htmlAnalysis of factors influencing Circular-Lean-Six Sigma 4.0 implementation considering sustainability implications: An exploratory study
Skalli, D., Charkaoui, A., Cherrafi, A., Shokri, A., Garza-Reyes, J. and Antony, J. 2023. Analysis of factors influencing Circular-Lean-Six Sigma 4.0 implementation considering sustainability implications: An exploratory study. International Journal of Production Research. https://doi.org/10.1080/00207543.2023.2251159Can Industry 5.0 Technologies Overcome Supply Chain Disruptions? - A Perspective Study on Pandemics, War, and Climate Change Issues
Agrawal, S., Agrawal, R., Kumar, A., Luthra, S. and Garza-Reyes, J.A. 2023. Can Industry 5.0 Technologies Overcome Supply Chain Disruptions? - A Perspective Study on Pandemics, War, and Climate Change Issues. Operations Management Research. pp. 1-16. https://doi.org/10.1007/s12063-023-00410-yAn empirical investigation on the deployment of Operational excellence in SMEs
Mahato, S., Dixit, A.R., Agrawal, R., Antony, J., Jose Arturo Garza-Reyes and Jamwal, A. 2023. An empirical investigation on the deployment of Operational excellence in SMEs. Benchmarking: An International Journal. pp. 1-42. https://doi.org/10.1108/BIJ-05-2022-0297Analyzing the integrated effect of Circular Economy, Lean Six Sigma and Industry 4.0 on sus-tainable manufacturing performance from a practice-based view perspective
Skalli, D., Charkaoui, A., Cherrafi, A.,, Jose Arturo Garza-Reyes, Antony, J. and Shokri, A. 2023. Analyzing the integrated effect of Circular Economy, Lean Six Sigma and Industry 4.0 on sus-tainable manufacturing performance from a practice-based view perspective. Business Strategy and the Environment. pp. 1-19. https://doi.org/10.1002/bse.3546Artificial Intelligence as an Enabler of Quick and Effective Production Repurposing Manufactur-ing: An Exploratory Review and Future Research Propositions
Garza-Reyes, J.A., Naz, F., Kumar, A., Agrawal, R., Majumdar, A. and Chokshi, H. 2023. Artificial Intelligence as an Enabler of Quick and Effective Production Repurposing Manufactur-ing: An Exploratory Review and Future Research Propositions. Production Planning & Control. pp. 1-24. https://doi.org/10.1080/09537287.2023.2248947Essential organizational variables for the implementation of Quality 4.0: empirical evidence from the Indian furniture industry
Ankesh Mittal, Sandeep Sachan, Vimal Kumar, Sachit Vardhan, Pratima Verma, Mahender Singh Kaswan and Jose Arturo Garza-Reyes 2023. Essential organizational variables for the implementation of Quality 4.0: empirical evidence from the Indian furniture industry. The TQM Journal. pp. 1-19. https://doi.org/10.1108/tqm-06-2023-0189Green Innovation and Firm Performance: The Mediating Role of Sustainability in the Automotive Industry
Maldonado-Guzmán, G, Garza-Reyes, J.A. and Pinzón-Castro, S.Y. 2023. Green Innovation and Firm Performance: The Mediating Role of Sustainability in the Automotive Industry. Management of Environmental Quality. pp. 1-22. https://doi.org/10.1108/MEQ-02-2023-0058A multi-objective Flexible Manufacturing System design optimization using a hybrid response surface methodology
Pasha, N., Amoozad Mahdiraji, H., Razavi Hajiagha, S.H., Garza-Reyes, J. and Joshi, R. 2023. A multi-objective Flexible Manufacturing System design optimization using a hybrid response surface methodology. Operations Management Research. pp. 1-17. https://doi.org/10.1007/s12063-023-00412-wHealthcare 4.0 digital technologies impact on quality of care: A systematic literature review
Jose Arturo Garza-Reyes, Marbouh, D., Swarnakar, V., Simsekler, M.C.E, Antony, J., Lizarelli, F.L., Jayaraman, R, Shokri, A., Cudney, E. and Ellahham, S. 2023. Healthcare 4.0 digital technologies impact on quality of care: A systematic literature review. Total Quality Management & Business Excellence. pp. 1-27. https://doi.org/10.1080/14783363.2023.2238629Employing the Internet of Things to Attain Resilience Across Supply Chain
Al-Talib, M., Melhem, W.Y., Nadeem, S., Anosike, A.I. and Garza-Reyes, J.A. 2023. Employing the Internet of Things to Attain Resilience Across Supply Chain. 13th International Conference on Industrial Engineering and Operations Management (IEOM), Manila, Philippines, 6-9 March. . IEOM Society International. https://doi.org/10.46254/AN13.20230592Sustainable Warehouse Features: A Systematic Literature Review
Al-Saad, W.K., Al-Talib, M., Nadeem, S. and Garza-Reyes, J.A., 2023. Sustainable Warehouse Features: A Systematic Literature Review. 13th International Conference on Industrial Engineering and Operations Management (IEOM). IEOM Society International. https://doi.org/10.46254/AN13.20230557Sustainable Supply Chain Management Drivers and Barriers in the Ethiopian Manufacturing Sec-tor
Weldemichael, M.A, Nadeem, S. and Garza-Reyes, J.A. 2023. Sustainable Supply Chain Management Drivers and Barriers in the Ethiopian Manufacturing Sec-tor. 13th International Conference on Industrial Engineering and Operations Management (IEOM), Manila, Philippines, 6-9 March. IOEM Society . https://doi.org/10.46254/AN13.20230243Achieving Circularity is a Distant Dream: Entrepreneurial Barriers to Circular Business Models in SMEs of Emerging Economies
Saharan, A., Samadhiya, A., Kumar, A., Pandey, K., Luthra, S. and Garza-Reyes, J.A. 2023. Achieving Circularity is a Distant Dream: Entrepreneurial Barriers to Circular Business Models in SMEs of Emerging Economies. Management Decision. pp. 1-24. https://doi.org/10.1108/MD-02-2023-0269Investigating the role of knowledge-based supply chains for supply chain resilience by graph theory matrix approach
Muruvvet Deniz Sezer, Melisa Ozbiltekin-Pala, Yigit Kazancoglu, Jose Arturo Garza-Reyes, Anil Kumar and Vikas Kumar 2023. Investigating the role of knowledge-based supply chains for supply chain resilience by graph theory matrix approach. Operations Management Research. pp. 1-11. https://doi.org/10.1007/s12063-023-00391-yLean Readiness of Organizations – A Systematic Scientometric Review
Prasad, K. V., Vasugi, V., Antony, J., Garza-Reyes, J. and Venkatesan, R. 2023. Lean Readiness of Organizations – A Systematic Scientometric Review. Total Quality Management & Business Excellence. pp. 1-54. https://doi.org/10.1080/14783363.2023.2232736Does the Integration of Lean Production and Industry 4.0 in Green Supply Chains Generate a Better Operational Performance?
Maldonado-Guzmán, G., Pinzón-Castro, S. Y. and Garza-Reyes, J. 2023. Does the Integration of Lean Production and Industry 4.0 in Green Supply Chains Generate a Better Operational Performance? Journal of Manufacturing Technology Management. pp. 1-21. https://doi.org/10.1108/JMTM-02-2023-0034Integrated Green Lean Six Sigma-Industry 4.0 approach to combat COVID-19: from literature review to framework development
Kaswan, M.S., Garza-Reyes, J.A., Rathi, R., Antony, J., Cross, J., Singh, M., Preet Singh, I. and Sony, M. 2023. Integrated Green Lean Six Sigma-Industry 4.0 approach to combat COVID-19: from literature review to framework development. International Journal of Lean Six Sigma. pp. 1-30. https://doi.org/10.1108/IJLSS-11-2022-0227Real-time Energy Flow Mapping: a VSM-based proposal for energy efficiency
Fontoura, L., de Mattos Nascimento, D. L., Neto, J.V., Garcia-Buendia, N., Garza-Reyes, J., Lima, G. B. A., Tortorella, G.L., Caiado, R.G.G and Meiriño, M.J. 2023. Real-time Energy Flow Mapping: a VSM-based proposal for energy efficiency. Journal of Cleaner Production. pp. 1-65. https://doi.org/10.1016/j.jclepro.2023.137871Interrelationships between Circular Economy and Industry 4.0: A Research Agenda for Sustainable Supply Chains
de Mattos Nascimento, D.L., de Oliveira‐Dias, D., Moyano‐Fuentes, J., Maqueira Marín, J.M. and Garza-Reyes, J. 2023. Interrelationships between Circular Economy and Industry 4.0: A Research Agenda for Sustainable Supply Chains. Business Strategy and the Environment. pp. 1-22. https://doi.org/10.1002/bse.3502Achieving the Sustainable Development Goals through Net Zero Emissions: Innovation-Driven Strategies for Transitioning from Incremental to Radical Lean, Green and Digital Technologies
Yadav, S., Samadhiya, A., Kumar, A., Majumdar, A., Jose Arturo Garza-Reyes and Luthra, S. 2023. Achieving the Sustainable Development Goals through Net Zero Emissions: Innovation-Driven Strategies for Transitioning from Incremental to Radical Lean, Green and Digital Technologies. Resources, Conservation & Recycling. 197, pp. 1-19. https://doi.org/10.1016/j.resconrec.2023.107094Exploration and Mitigation of Green Lean Six Sigma Barriers: A Higher Education Institutions perspective
Yadav, V., Kumar, V.,, Gahlot, P., Mittal, A., Kaswan, M.S., Garza-Reyes, J.A., Rathi, R., Antony, J., Kumar, A. and Owad, A. 2023. Exploration and Mitigation of Green Lean Six Sigma Barriers: A Higher Education Institutions perspective. TQM Journal. pp. 1-22. https://doi.org/10.1108/TQM-03-2023-0069Sustainable and Resilient Supplier Selection in the Context of Circular Economy: An Ontology-Based Model
Echefaj, K., Charkaoui, A., Cherrafi, A., Garza-Reyes, J., Khan, S. A. R. and Benabdellah, A. C. 2023. Sustainable and Resilient Supplier Selection in the Context of Circular Economy: An Ontology-Based Model. Management of Environmental Quality. 34 (5), pp. 1461-1489. https://doi.org/10.1108/MEQ-02-2023-0037Lean-sustainability Assessment Framework Development: Evidence from the Construction Industry
Jose Arturo Garza-Reyes, M.S., Antony, J. and Nair, G. 2023. Lean-sustainability Assessment Framework Development: Evidence from the Construction Industry. Total Quality Management & Business Excellence. pp. 1-37. https://doi.org/10.1080/14783363.2023.2222088Industry 4.0 Benefits, Challenges, Critical Success Factors: Comparative analysis through the lens of Resource Dependence Theory across continents and economies
Antony, J., Sony, M., Garza-Reyes, J., McDermott, O., Tortorella, G., Jayaraman, R., Sucharitha, R. S., Salentijin , W. and Maalouf, M. 2023. Industry 4.0 Benefits, Challenges, Critical Success Factors: Comparative analysis through the lens of Resource Dependence Theory across continents and economies. Journal of Manufacturing Technology Management. pp. 1-25. https://doi.org/10.1108/JMTM-10-2022-0371Circular and Digital Systems in SMEs: An Assessment of the Past and Present Literature for Future Research Directions
Ashutosh Samadhiya, Anil Kumar and Jose Arturo Garza-Reyes 2023. Circular and Digital Systems in SMEs: An Assessment of the Past and Present Literature for Future Research Directions. International Journal of Global Business and Competitiveness. pp. 1-14. https://doi.org/10.1007/s42943-023-00073-3Guest editorial: Performance measurement in supply chains during disruptions: lessons from the COVID-19 pandemic
Frederico, G.F., Kumar, V., Garza-Reyes, J.A., Martins, R.A., Kumar, A. 2023. Guest editorial: Performance measurement in supply chains during disruptions: lessons from the COVID-19 pandemic. International Journal of Quality and Reliability Management. 40 (5), pp. 1-6. https://doi.org/10.1108/IJQRM-05-2023-451Industry 4.0 Maturity and Readiness Assessment: An Empirical validation using Confirmatory Composite Analysis
Garza-Reyes, J.A., Hajoary, P. K. P. and Balachandra, P. 2023. Industry 4.0 Maturity and Readiness Assessment: An Empirical validation using Confirmatory Composite Analysis. Production Planning & Control. pp. 1-19. https://doi.org/10.1080/09537287.2023.2210545Unveiling the Role of Sustainable Supply Chain Drivers Toward Knowledge-Based Economy via a Novel Permutation Approach: Implications from an Emerging Economy
Said, A., Razavi Hajiagha, S.H., Garza-Reyes, J. and Amoozad Mahdiraji, H. 2023. Unveiling the Role of Sustainable Supply Chain Drivers Toward Knowledge-Based Economy via a Novel Permutation Approach: Implications from an Emerging Economy. Operations Management Research. https://doi.org/10.1007/s12063-023-00380-1Analysis of the Factors Influencing the Stability of Stored Grains: Implications for Agricultural Sustainability and Food Security
Tushar, S.R, Bin Alam, M.F., Zaman, S.M., Garza-Reyes, J., Bari, A.B.M.M. and Karmaker, C.L. 2023. Analysis of the Factors Influencing the Stability of Stored Grains: Implications for Agricultural Sustainability and Food Security. Sustainable Operations and Computers . pp. 1-45. https://doi.org/10.1016/j.susoc.2023.04.003Industry 4.0 Maturity Assessment: A multi-dimensional indicator approach
Garza-Reyes, J.A., Hajoary, P.K. and MA, A. 2023. Industry 4.0 Maturity Assessment: A multi-dimensional indicator approach. International Journal of Productivity and Performance Management. pp. 1-24. https://doi.org/10.1108/IJPPM-07-2022-Research developments in Sustainable Supply Chain Management considering Optimization and Industry 4.0 Techniques: A Systematic Review
Kumar Detwal, P., Agrawal, R., Samadhiya, A., Kumar, A. and Garza-Reyes, J.A. 2023. Research developments in Sustainable Supply Chain Management considering Optimization and Industry 4.0 Techniques: A Systematic Review. Benchmarking: An International Journal. pp. 1-21.Beyond Lean Manufacturing and Sustainable Performance: Are the Circular Economy practices worth pursuing?
Garza-Reyes, J.A. and Maldonado-Guzman, G. 2023. Beyond Lean Manufacturing and Sustainable Performance: Are the Circular Economy practices worth pursuing? Management of Environmental Quality. pp. 1-20. https://doi.org/10.1108/MEQ-11-2022-0324Industrial Revolution and Environmental Sustainability: An Analytical Interpretation of Research Constituents in Industry 4.0
Malik, A., Sharma, S., Batra, I., Sharma.C., Kaswan, M.S. and Garza-Reyes, J. 2023. Industrial Revolution and Environmental Sustainability: An Analytical Interpretation of Research Constituents in Industry 4.0. International Journal of Lean Six Sigma. pp. 1-28. https://doi.org/10.1108/IJLSS-02-2023-0030Digging DEEP: Futuristic building blocks of omni-channel healthcare supply chains resiliency using a machine learning approach
Kumar, A., Naz, F., Luthra, S., Vashistha, R., Kumar, V., Garza-Reyes, J. and Chhabra, D. 2023. Digging DEEP: Futuristic building blocks of omni-channel healthcare supply chains resiliency using a machine learning approach. Journal of Business Research. 162, pp. 1-14. https://doi.org/10.1016/j.jbusres.2023.113903Are Emerging Technologies Unlocking the Potential of Sustainable Practices in the Context of a Net Zero Economy? An Analysis of Driving Forces
Agrawal, R., Priyadarshinee, P., Kumar, A., Luthra, S., Garza-Reyes, J.A. and Kadyan, S. 2023. Are Emerging Technologies Unlocking the Potential of Sustainable Practices in the Context of a Net Zero Economy? An Analysis of Driving Forces. Environmental Science and Pollution Research. https://doi.org/10.1007/s11356-023-26434-2Regenerating the Logistics Industry through the Physical Internet Paradigm: A Systematic Literature Review and Future Research Orchestration
Samadhiya, A., Agrawal, R., Kumar, A. and Garza-Reyes, J.A. 2023. Regenerating the Logistics Industry through the Physical Internet Paradigm: A Systematic Literature Review and Future Research Orchestration. Computers & Industrial Engineering. 178, pp. 1-17. https://doi.org/10.1016/j.cie.2023.109150What digital-enabled dynamic capabilities support the circular economy? A multiple case study approach
Neri, A, Negri, M, Cagno, E., Kumar, V., and Garza-Reyes, J.A. 2023. What digital-enabled dynamic capabilities support the circular economy? A multiple case study approach. Business Strategy and the Environment. pp. 1-19. https://doi.org/10.1002/bse.3409Opportunities for Disruptive Digital Technologies to Ensure Circularity in Supply Chain: A Critical Review of Drivers, Barriers and Challenges
Rohit, A., Yadav, V.S., Majumdar, A., Kumar, A., Luthra, S. and Garza-Reyes, J. 2023. Opportunities for Disruptive Digital Technologies to Ensure Circularity in Supply Chain: A Critical Review of Drivers, Barriers and Challenges. Computers & Industrial Engineering. pp. 1-46. https://doi.org/10.1016/j.cie.2023.109140Integration of Industry 4.0 technologies into Lean Six Sigma DMAIC: a systematic review
Pongboonchai-Empl, T., Antony, J., Garza-Reyes, J.A., Komkowski, T. and Tortorella, G.L. 2023. Integration of Industry 4.0 technologies into Lean Six Sigma DMAIC: a systematic review. Production Planning and Control: The Management of Operations. pp. 1-26. https://doi.org/10.1080/09537287.2023.2188496Green Lean Six Sigma for sustainability improvement: a systematic review and future research agenda
Yadav, V., Kaswan, M.S., Gahlot, P., Duhan, R.K., Garza-Reyes, J., Rathi, R., Chaudhary, R. and Yadav, G. 2023. Green Lean Six Sigma for sustainability improvement: a systematic review and future research agenda. International Journal of Lean Six Sigma. pp. 1-32. https://doi.org/10.1108/IJLSS-06-2022-0132Logistics service providers and Industry 4.0: A systematic literature review
da Silva, R. M., Frederico, G. F. and Garza-Reyes, J. 2023. Logistics service providers and Industry 4.0: A systematic literature review. Logistics. 7 (1), pp. 1-26. https://doi.org/10.3390/logistics7010011Assessment of Sustainable Development Goals through Industry 4.0 and reconfigurable manufacturing system practices
Rajesh Pansare, Gunjan Yadav, Jose Arturo Garza-Reyes and Madhukar Raosaheb Nagare 2023. Assessment of Sustainable Development Goals through Industry 4.0 and reconfigurable manufacturing system practices. Journal of Manufacturing Technology Management. 34 (3), pp. 1-31. https://doi.org/10.1108/jmtm-05-2022-0206Blockchain Technology and Circular Economy in the environment of Total Productive Maintenance: A Natural Resource-Based View Perspective
Samadhiya, A.,, Agrawal, R, Kumar, A. and Garza-Reyes, J.A. 2023. Blockchain Technology and Circular Economy in the environment of Total Productive Maintenance: A Natural Resource-Based View Perspective. Journal of Manufacturing Technology Management. https://doi.org/10.1108/JMTM-08-2022-0299
Impact of the COVID-19 Pandemic on Manufacturing Operations and Supply Chain Resilience: Effects and Response Strategies
Bastas, A and Garza-Reyes, Jose Arturo 2022. Impact of the COVID-19 Pandemic on Manufacturing Operations and Supply Chain Resilience: Effects and Response Strategies. Journal of Manufacturing Technology Management.Blockchain Technology for Viable Circular Digital Supply Chains: An Integrated Approach for Evaluating the Implementation Barriers
Chaouni Benabdellah, A., Zekhnini, K., Cherrafi, A., Garza-Reyes, J.A., Kumar, A. and El Baz, J. 2022. Blockchain Technology for Viable Circular Digital Supply Chains: An Integrated Approach for Evaluating the Implementation Barriers. Benchmarking: An International Journal. pp. 1-28. https://doi.org/10.1108/BIJ-04-2022-0240Investigating the Influence of Total Productive Maintenance Key Success Factors on the Social Sustainability Dimension of Manufacturing SMEs
Samadhiya, A., Agrawal, R. and Garza-Reyes, J.A. 2022. Investigating the Influence of Total Productive Maintenance Key Success Factors on the Social Sustainability Dimension of Manufacturing SMEs. Benchmarking: An International Journal. pp. 1-30. https://doi.org/10.1108/BIJ-05-2022-0287The Integration of Lean and Human Resource Management Practices as an Enabler for Lean Deployment- A Systematic Literature Review
Kaur Paposa, K., Thakur, P., Antony, J., McDermott, O. and Garza-Reyes, J. 2022. The Integration of Lean and Human Resource Management Practices as an Enabler for Lean Deployment- A Systematic Literature Review. TQM Journal. pp. 1-23. https://doi.org/10.1108/TQM-12-2022-0355Analysing the Adoption Barriers of Low-Carbon Operations: A Step Forward for Achieving Net-Zero Emissions
Kumar, A., Luthra, S., Mangla, S., K., Jose Arturo Garza-Reyes and Kazancoglu, Y 2022. Analysing the Adoption Barriers of Low-Carbon Operations: A Step Forward for Achieving Net-Zero Emissions. Resources Policy. 80, pp. 1-14. https://doi.org/10.1016/j.resourpol.2022.103256Interrelationships among Lean HRM Practices and their Impact on Firm Performance: A Comparison between the Jordanian and German Models
Ta'Amnha, M., Jreissat, M., Samawi, G., Jraisat, L., Bwaliez, O., Kumar, A., Garza-Reyes, J. and Upadhyay, A. 2022. Interrelationships among Lean HRM Practices and their Impact on Firm Performance: A Comparison between the Jordanian and German Models. International Journal of Lean Six Sigma. pp. 1-32. https://doi.org/10.1108/IJLSS-08-2022-0178Operational Excellence Methodologies in the Energy Sector: A Systematic Literature Review
Al Zaabi, Y., Antony, J., Garza-Reyes, J.A. and Tortorella, G.L. 2022. Operational Excellence Methodologies in the Energy Sector: A Systematic Literature Review. Total Quality Management & Business Excellence. pp. 1-24. https://doi.org/10.1080/14783363.2022.2157715The Important Role of System Dynamics Investigation on Business Model, Industry and Performance Management
Gozali, L., Zagloel, T.Y., Simatupang, T, Sutopo, W., Gunawan, A., Liang, Y., Yahya, B.N, Irawan, A., Garza-Reyes, J.A., Suseno, Y. and Gunadi, A. 2022. The Important Role of System Dynamics Investigation on Business Model, Industry and Performance Management. International Journal of Productivity and Performance Management. pp. 1-36. https://doi.org/10.1108/IJPPM-07-2021-0399Supply Chain Resilience Strategies and their Impact on Sustainability: An Investigation from the Automobile Sector
Singh, J., Hamid, A. B. A. and Garza-Reyes, J. 2022. Supply Chain Resilience Strategies and their Impact on Sustainability: An Investigation from the Automobile Sector. Operations and Supply Chain Management: An International Journal. https://doi.org/10.1108/SCM-06-2022-0225Coordination in a Closed-Loop Sustainable Supply Chain Considering Dual-Channel and Cost-Sharing Contract: Evidence from an Emerging Economy
Amoozad Mahdiraji, H., Govindan, K., Madadi, S. and Garza-Reyes, J.A. 2022. Coordination in a Closed-Loop Sustainable Supply Chain Considering Dual-Channel and Cost-Sharing Contract: Evidence from an Emerging Economy. Journal of the Operational Research Society. https://doi.org/10.1080/01605682.2022.2147032Unveiling coordination contracts’ roles considering circular economy and eco-innovation toward pharmaceutical supply chain resiliency: evidence of an emerging economy
Amoozad Mahdiraji, H., Govindan, K., Yaftiyan, F., Jose Arturo Garza-Reyes and Razavi Hajiagha, S.H 2022. Unveiling coordination contracts’ roles considering circular economy and eco-innovation toward pharmaceutical supply chain resiliency: evidence of an emerging economy. Journal of Cleaner Production. pp. 1-17. https://doi.org/10.1016/j.jclepro.2022.135135Integrating Green Lean Six Sigma and Industry 4.0: A Conceptual Framework
Kaswan, M.S, Rathi, R., Cross, J., Jose Arturo Garza-Reyes, Antony, J. and Yadav, V. 2022. Integrating Green Lean Six Sigma and Industry 4.0: A Conceptual Framework. Journal of Manufacturing Technology Management. 19 (3), pp. 402-417. https://doi.org/10.1108/JMTM-03-2022-0115Decision support framework for inventory management combining fuzzy multi-criteria methods, genetic algorithm and artificial neural network
de Paula Vidal, G.H, Gusmão Caiado, R.G., Scavarda, L.F., Ivson, P. and Garza-Reyes, J.A. 2022. Decision support framework for inventory management combining fuzzy multi-criteria methods, genetic algorithm and artificial neural network. Computers & Industrial Engineering. pp. 1-46. https://doi.org/10.1016/j.cie.2022.108777Analysing Critical Factors of Strategic Alignment Between Operational Excellence and Industry 4.0 Technologies in Smart Manufacturing
Ozbiltekin-Pala, M., Kazancoglu, Y., Kumar, A., Garza-Reyes, J. and Luthra, S. 2022. Analysing Critical Factors of Strategic Alignment Between Operational Excellence and Industry 4.0 Technologies in Smart Manufacturing. The TQM Journal. pp. 1-17. https://doi.org/10.1108/TQM-07-2022-0232The integration of Industry 4.0 and Lean Management: A systematic review and constituting elements perspective
Komkowski, T., Garza-Reyes, J., Antony, J., Tortorella, G.L and Pongboonchai-Empl, T. 2022. The integration of Industry 4.0 and Lean Management: A systematic review and constituting elements perspective. TQM & Business Excellence. pp. 1-19. https://doi.org/10.1080/14783363.2022.2141107Sustainable Lean Six Sigma project selection in manufacturing environments using Best-Worst Method
Swarnakar, V., Singh, A. R., Antony, J., Tiwari, A. K. and Garza-Reyes, J. 2022. Sustainable Lean Six Sigma project selection in manufacturing environments using Best-Worst Method. TQM & Business Excellence. pp. 1-26. https://doi.org/10.1080/14783363.2022.2139675Investigating Potential Interventions on disruptive impacts of Industry 4.0 technologies in Circular Supply chains: Evidence from SMEs of an Emerging Economy
Amoozad Mahdiraji, H., Fatemeh, Y., Abbasi-Kamardi, A.. and Garza-Reyes, J. 2022. Investigating Potential Interventions on disruptive impacts of Industry 4.0 technologies in Circular Supply chains: Evidence from SMEs of an Emerging Economy. Computers & Industrial Engineering. 174, pp. 1-18. https://doi.org/10.1016/j.cie.2022.108753Does Circular Economy Affect Financial Performance? The Mediating Role of Sustainable Sup-ply Chain Management in the Automotive Industry
Rodríguez-González, R.B., Maldonado-Guzmán, G., Madrid-Guijarro, A. and Jose Arturo Garza-Reyes 2022. Does Circular Economy Affect Financial Performance? The Mediating Role of Sustainable Sup-ply Chain Management in the Automotive Industry. Journal of Cleaner Production. 379, pp. 1-8. https://doi.org/10.1016/j.jclepro.2022.134670The role of Industry 4.0 Technologies on Performance Measurement Systems of Supply chains during Global Pandemics: An Interval-Valued-Intuitionistic-Hesitant-Fuzzy Approach
Mahdiraji, H. A., Yaftiyan, F., Abbasi, K., Kamardi, A.A.A., Garza-Reyes, J. and Hajiagha, S.H.R. 2022. The role of Industry 4.0 Technologies on Performance Measurement Systems of Supply chains during Global Pandemics: An Interval-Valued-Intuitionistic-Hesitant-Fuzzy Approach. International Journal of Quality and Reliability Management. pp. 1-25. https://doi.org/10.1108/IJQRM-03-2022-0094Modeling the impact of Industry 4.0 base technologies on the development of organizational learning capabilities
Tortorella, G.L., Fogliatto, F.S, Anzanello, M.J, Cawley Vergara, A.M, Vassolo, R. and Jose Arturo Garza-Reyes 2022. Modeling the impact of Industry 4.0 base technologies on the development of organizational learning capabilities. Operations Management Research. pp. 1-14. https://doi.org/10.1007/s12063-022-00329-wIndustry 4.0 and Lean Six Sigma Integration in Manufacturing: A Literature Review, an Integrated Framework and Proposed Research Perspectives
Skalli, D., Charkaoui, A., Cherrafi, A., Garza-Reyes, J., Jiju, A. and Shokri, A. 2022. Industry 4.0 and Lean Six Sigma Integration in Manufacturing: A Literature Review, an Integrated Framework and Proposed Research Perspectives. Quality Management Journal. pp. 1-25. https://doi.org/10.1080/10686967.2022.2144784A Continuous Improvement Implementation Framework for Manufacturing Companies: a Delphi Study-Based Approach for Development and Validation
McLean, R., Jiju, A., Garza-Reyes, J. and Samadhiya, A. 2022. A Continuous Improvement Implementation Framework for Manufacturing Companies: a Delphi Study-Based Approach for Development and Validation. International Journal of Quality and Reliability Management. pp. 1-25. https://doi.org/10.1108/IJQRM-04-2021-0096Unveiling the relation between the challenges and benefits of Operational Excellence and Industry 4.0: A Hybrid Fuzzy Decision-Making Approach
Garza-Reyes, J., Razavi H., Seyed, H., Amoozad Mahdiraji, H., Moradi, S. and Alaei, S 2022. Unveiling the relation between the challenges and benefits of Operational Excellence and Industry 4.0: A Hybrid Fuzzy Decision-Making Approach. Total Quality Management Journal. https://doi.org/10.1108/TQM-07-2022-0237Total Productive Maintenance and Industry 4.0 in a Sustainability Context: Exploring the Mediating Effect of Circular Economy
Samadhiya, A., Agrawal, R., Kumar, A., Jose Arturo Garza-Reyes, Luthra, S. and Srivastava, D. K. 2022. Total Productive Maintenance and Industry 4.0 in a Sustainability Context: Exploring the Mediating Effect of Circular Economy. International Journal of Logistics Management. https://doi.org/10.1108/IJLM-04-2022-0192Modeling and analysing the barriers to the acceptance of energy-efficient appliances using an ISM-DEMATEL approach
Aggarwal, G., Jain, V., Ajmera, P. and Jose Arturo Garza-Reyes 2022. Modeling and analysing the barriers to the acceptance of energy-efficient appliances using an ISM-DEMATEL approach. Journal of Modelling in Management . https://doi.org/10.1108/JM2-02-2022-0064/full/htmlTheorizing the Principles of Sustainable Production in the context of Circular Economy and Industry 4.0.
Viles, E., Kalemkerian, F., Garza-Reyes, J., Antony, J. and Santos. J. 2022. Theorizing the Principles of Sustainable Production in the context of Circular Economy and Industry 4.0. Sustainable Production and Consumption. 33, pp. 1-16. https://doi.org/10.1016/j.spc.2022.08.024Enablers of post-COVID-19 customer demand resilience: Evidence from fast-fashion MSMEs
Fares, N., Llorete, J., Kumar, V., Frederico, G.F., Kumar, A. and Garza-Reyes, J. 2022. Enablers of post-COVID-19 customer demand resilience: Evidence from fast-fashion MSMEs. Benchmarking: An International Journal. https://doi.org/10.1108/BIJ-11-2021-0693Integrating Industry 4.0 and Total Productive Maintenance for Global Sustainability
Samadhiya, A, Agrawal, R. and Garza-Reyes, J. 2022. Integrating Industry 4.0 and Total Productive Maintenance for Global Sustainability. Total Quality Management Journal. pp. 1-27. https://doi.org/10.1108/TQM-05-2022-0164Slowing the fast fashion industry: an all-round perspective
Centobelli, P., Abbate, S., Nadeem, S. and Garza-Reyes, J. 2022. Slowing the fast fashion industry: an all-round perspective . Current Opinion in Green and Sustainable Chemistry . pp. 1-18. https://doi.org/10.1016/j.cogsc.2022.100684A Systematic Review of the Integration of Industry 4.0 with Quality-related Operational Excellence Methodologies
Komkowski, T., Antony, J.,, Garza-Reyes, J., Tortorella, G.L. and Pongboonchai-Empl, T. 2022. A Systematic Review of the Integration of Industry 4.0 with Quality-related Operational Excellence Methodologies. Quality Management Journal. pp. 1-13. https://doi.org/10.1080/10686967.2022.2144783A Novel Travel Time Estimation Model for Modeling Green Time-Dependent Vehicle Routing Problem in Food Supply Chain
Asgharizadeh, E., Jooybar, S., Amoozad Mahdiraji, H. and Jose Arturo Garza-Reyes 2022. A Novel Travel Time Estimation Model for Modeling Green Time-Dependent Vehicle Routing Problem in Food Supply Chain. Sustainability. 14 (14), pp. 1-16. https://doi.org/10.3390/su14148633The COVID19 impact on humanitarian operations: lessons for future disrupting events
Shah, B., Frederico, G. F., Kumar, V., Jose Arturo Garza-Reyes and Kumar, A. 2022. The COVID19 impact on humanitarian operations: lessons for future disrupting events. Journal of Humanitarian Logistics and Supply Chain Management . 12 (4), pp. 473-481. https://doi.org/10.1108/JHLSCM-10-2022-132Impact of the COVID-19 pandemic on manufacturing operations and supply chain resilience: effects and response strategies
Ali Bastas and Jose Arturo Garza-Reyes 2022. Impact of the COVID-19 pandemic on manufacturing operations and supply chain resilience: effects and response strategies. Journal of Manufacturing Technology Management. https://doi.org/10.1108/jmtm-09-2021-0357Analyzing the key performance indicators of Circular Supply Chains by Hybrid Fuzzy Cognitive Mapping and Fuzzy DEMATEL: Evidence from Healthcare Sector
Dolatabad, A.H, Mahdiraji, H.A., Babgohari, A.Z., Jose Arturo Garza-Reyes and Ai, A. 2022. Analyzing the key performance indicators of Circular Supply Chains by Hybrid Fuzzy Cognitive Mapping and Fuzzy DEMATEL: Evidence from Healthcare Sector. Environment, Development and Sustainability. pp. 1-27. https://doi.org/10.1007/s10668-022-02535-9Measuring the financial impact of equipment performance improvement: ISB and IEB metrics
Luis Alejandro Gólcher-Barguil, Simon Peter Nadeem, Jose Arturo Garza-Reyes, Ashutosh Samadhiya and Anil Kumar 2022. Measuring the financial impact of equipment performance improvement: ISB and IEB metrics. Benchmarking: An International Journal. pp. 1-24. https://doi.org/10.1108/bij-09-2021-0559Role of Information and Communication Technology in Mitigating Risks in Indian Agricultural Supply Chains
Shukla, S., Kapoor, R., Gupta, N., Garza-Reyes, J. and Kumar, V. 2022. Role of Information and Communication Technology in Mitigating Risks in Indian Agricultural Supply Chains. Supply Chain Management. https://doi.org/10.1108/SCM-08-2021-0386Analyzing the alignment between the Green Lean and Circular strategies: Towards a Circular Lean approach
Kalemkerian, F., Santos, J., Tanco, M., Garza-Reyes, J.A. and Viles, E. 2022. Analyzing the alignment between the Green Lean and Circular strategies: Towards a Circular Lean approach. Journal of Manufacturing Technology Management. pp. 1-21. https://doi.org/10.1108/JMTM-11-2021-0480Decision-making through Fuzzy TOPSIS and COPRAS approaches for lean tools selection: A case study of automotive accessories manufacturing industry
Kumar, M.B., Antony, J., Cudneyd, E., Furterere S.L., Garza-Reyes, J. and Senthil, S.M 2022. Decision-making through Fuzzy TOPSIS and COPRAS approaches for lean tools selection: A case study of automotive accessories manufacturing industry. International Journal of Management Science and Engineering Management. pp. 1-11. https://doi.org/10.1080/17509653.2022.2064356A toolset for complex decision making in analyze phase of Lean Six Sigma Project: A case validation
Singh, M, Rathi, R., Antony, J. and Jose Arturo Garza-Reyes 2022. A toolset for complex decision making in analyze phase of Lean Six Sigma Project: A case validation. International Journal of Lean Six Sigma. pp. 1-19.A sustainable circular 3D printing model for recycling metal scrap in the automotive industry
Daniel Luiz de Mattos Nascimento, Renan Mury Nepomuceno, Rodrigo Goyannes Gusmão Caiado, Juan Manuel Maqueira, José Moyano-Fuentes and Jose Arturo Garza-Reyes 2022. A sustainable circular 3D printing model for recycling metal scrap in the automotive industry. Journal of Manufacturing Technology Management. pp. 1-17. https://doi.org/10.1108/jmtm-10-2021-0391Public Hospitals performance measurement through a Three Staged Data Envelopment Analysis approach: Evidence from an emerging economy
Hajiagha, S.H.R., Amoozad, Mahdiraji, H., Hashemi, S.S., Garza-Reyes, J. and Joshi, R. 2022. Public Hospitals performance measurement through a Three Staged Data Envelopment Analysis approach: Evidence from an emerging economy. Cybernetics and Systems. pp. 1-26. https://doi.org/10.1080/01969722.2022.2055382Green Lean Six Sigma Sustainability Oriented Project Selection and Implementation Framework for Manufacturing Industry
Kaswan, M.S., Rathi, R., Garza-Reyes, J. and Antony, J 2022. Green Lean Six Sigma Sustainability Oriented Project Selection and Implementation Framework for Manufacturing Industry. International Journal of Lean Six Sigma. pp. 1-39. https://doi.org/10.1108/IJLSS-12-2020-0212A new way of environmentally sustainable manufacturing with assessing transformation through the green deployment of Lean Six Sigma projects
Shokri, A., Antony, J. and Garza-Reyes, J. 2022. A new way of environmentally sustainable manufacturing with assessing transformation through the green deployment of Lean Six Sigma projects. Journal of Cleaner Production. 351, pp. 1-41. https://doi.org/10.1016/j.jclepro.2022.131510A review of lean and agile management in humanitarian supply chains: analysing the pre-disaster and post-disaster phases, and future directions
Upadhyay, A., Mukhuty, S., Kumari, S., Garza-Reyes, J. and Shukla, V. 2022. A review of lean and agile management in humanitarian supply chains: analysing the pre-disaster and post-disaster phases, and future directions. Production Planning & Control. 33 (6-7), pp. 641-654. https://doi.org/10.1080/09537287.2020.1834133Green Lean Six Sigma for improving manufacturing sustainability: Framework development and validation
Rajeev Rathi, Mahender Singh Kaswan, Jose Arturo Garza-Reyes, Jiju Antony and Jennifer Cross 2022. Green Lean Six Sigma for improving manufacturing sustainability: Framework development and validation. Journal of Cleaner Production. 345. https://doi.org/10.1016/j.jclepro.2022.131130A framework for the systematic implementation of Green-Lean and sustainability in SMEs
Rebecca Siegel, Jiju Antony, Kannan Govindan, Jose Arturo Garza-Reyes, Bart Lameijer and Ashutosh Samadhiya 2022. A framework for the systematic implementation of Green-Lean and sustainability in SMEs. Production Planning & Control. https://doi.org/10.1080/09537287.2022.2052200A framework for assessing trust in e-government services under uncertain environment
Shayganmehr, M, Kumar, A, Garza-Reyes, Jose Arturo and Zavadskas, E. K. 2022. A framework for assessing trust in e-government services under uncertain environment. Information Technology & People. pp. 1-38. https://doi.org/10.1108/ITP-01-2021-0096Barriers to Sustainable Sourcing in the Apparel and Fashion-Luxury Industry
Bhandari, N, Garza-Reyes, Jose Arturo, Rocha-Lona, L, Kumar, A., Naz, F and Joshi, R 2022. Barriers to Sustainable Sourcing in the Apparel and Fashion-Luxury Industry. Sustainable Production and Consumption. 31, pp. 220-235. https://doi.org/10.1016/j.spc.2022.02.007Redesigning Traditional Linear Supply Chains into Circular Supply Chains – A Study into its Challenges
Tarun, Roy, Garza-Reyes, Jose Arturo, Kumar, Vikas, Kumar, Anil and Agrawal, Rohit 2022. Redesigning Traditional Linear Supply Chains into Circular Supply Chains – A Study into its Challenges. Sustainable Production and Consumption. 31, pp. 113-126. https://doi.org/10.1016/j.spc.2022.02.004Exploration and Investigation of Green Lean Six Sigma Adoption Barriers for Manufacturing Sustainability
Kaswan, Mahender Singh, Rathi, Rajeev, Garza-Reyes, Jose Arturo and Antony, Jiju 2021. Exploration and Investigation of Green Lean Six Sigma Adoption Barriers for Manufacturing Sustainability. IEEE Transactions on Engineering Management. https://doi.org/10.1109/TEM.2021.3108171Impact of the Strategic Sourcing Process on the Supply Chain Response to the COVID-19 effects
Frederico, G.F., Kumar, V and Garza-Reyes, Jose Arturo 2021. Impact of the Strategic Sourcing Process on the Supply Chain Response to the COVID-19 effects. Business Process Management Journal. https://doi.org/10.1108/BPMJ-01-2021-0050A novel time, cost, quality and risk tradeoff model with a knowledge-based hesitant fuzzy in-formation: An R&D project application
Mahdiraji, H.A, Sedigh, M., Hajiagha, S.H.R., Garza-Reyes, Jose Arturo, Jafari-Sadeghi, V. and Dana, L.P. 2021. A novel time, cost, quality and risk tradeoff model with a knowledge-based hesitant fuzzy in-formation: An R&D project application. Technological Forecasting and Social Change. https://doi.org/10.1016/j.techfore.2021.121068Increasing Service Quality at a University: A Continuous Improvement Project
Gonzalez Aleu, Fernando, Granda Gutierrez, Edgar Marco Aurelio, Garza-Reyes, Jose Arturo, Garza Villegas, Juan Baldemar and Vazquez Hernandez, Jesus 2021. Increasing Service Quality at a University: A Continuous Improvement Project. Quality Assurance in Education. https://doi.org/10.1108/QAE-02-2021-0020Circular Economy: Exploratory Study of Steel Industry in Thailand
Piyathanavong, Vichathorn, Garza-Reyes, Jose Arturo, Huynh, Van-Nam, Olapiriyakul, Sun and Karnjana, Jessada 2021. Circular Economy: Exploratory Study of Steel Industry in Thailand. Proceedings of the 11th Conference on Industrial Engineering and Operations Management (IEOM).Exploration and Prioritization of Just in Time Enablers for Sustainable Healthcare: An Integrated GRA-Fuzzy TOPSIS Application
Singh Kaswan, Mahender, Rathi, Rajeev, Singh, Mahipal, Garza-Reyes, Jose Arturo and Antony, Jiju 2021. Exploration and Prioritization of Just in Time Enablers for Sustainable Healthcare: An Integrated GRA-Fuzzy TOPSIS Application. World Journal of Engineering. https://doi.org/10.1108/WJE-09-2020-0414/full/htmlA Novel Location-Inventory-Routing Problem in a Two-Stage Red Meat Supply Chain with Logistic Decisions: Evidence from an Emerging
Rahbari, M., Razavi Hajiagha, S. H., Amoozad Mahdiraji, H., Riyahi Dorcheh, F. and Garza-Reyes, Jose Arturo 2021. A Novel Location-Inventory-Routing Problem in a Two-Stage Red Meat Supply Chain with Logistic Decisions: Evidence from an Emerging. Kybernetes. https://doi.org/10.1108/K-01-2021-0012Quality assurance for operating room illumination through lean six sigma
Ozturkoglu, Y, Kazancoglu, Y, Sagnak, M and Garza-Reyes, Jose Arturo 2021. Quality assurance for operating room illumination through lean six sigma. International Journal of Mathematical, Engineering and Management Sciences. https://doi.org/10.33889/IJMEMS.2021.6.3.045Lean Six Sigma project selection in a manufacturing environment using hybrid methodology based on intuitionistic fuzzy MADM approach
Singh, Mahipal, Rathi, Rajeev, Antony, Jiju and Garza-Reyes, Jose Arturo 2021. Lean Six Sigma project selection in a manufacturing environment using hybrid methodology based on intuitionistic fuzzy MADM approach. IEEE Transactions on Engineering Management. https://doi.org/10.1109/TEM.2021.3049877Scoping review of the readiness for sustainable implementation of lean six sigma projects in the manufacturing sector
Shokri, A., Antony, J., Garza-Reyes, J.A., Upton, M. 2021. Scoping review of the readiness for sustainable implementation of lean six sigma projects in the manufacturing sector. International Journal of Quality and Reliability Management. https://doi.org/10.1108/IJQRM-08-2020-0261A Six-Sigma DMAIC Approach to Improve the Sales Process of a Technology Start-Up
Garza-Reyes, J. and Nadeem, S. 2021. A Six-Sigma DMAIC Approach to Improve the Sales Process of a Technology Start-Up. International Journal of Mathematical, Engineering and Management Sciences. 6 (6), pp. 1487-1517. https://doi.org/10.33889/IJMEMS.2021.6.6.089Evaluating key capabilities for developing global collaborative networks using a multi-layer decision-making approach
Hannan Amoozad Mahdiraji, Khalid Hafeez, Ali Asghar Abbasi Kamardi and Jose Arturo Garza-Reyes 2021. Evaluating key capabilities for developing global collaborative networks using a multi-layer decision-making approach. Industrial Management & Data Systems. https://doi.org/10.1108/imds-01-2021-0058Sustainability concerns on consumers’ attitude towards short food supply chains: an empirical investigation
Wang, Meng, Kumar, Vikas, Ruan, Ximing, Saad, Mohammed, Garza-Reyes, Jose Arturo and Kumar, Anil 2021. Sustainability concerns on consumers’ attitude towards short food supply chains: an empirical investigation. Operations Management Research. https://doi.org/10.1007/s12063-021-00188-xNexus of circular economy and sustainable business performance in the era of digitalization
Rohit Agrawal, Vishal Ashok Wankhede, Anil Kumar, Arvind Upadhyay and Jose Arturo Garza-Reyes 2021. Nexus of circular economy and sustainable business performance in the era of digitalization. International Journal of Productivity and Performance Management. https://doi.org/10.1108/ijppm-12-2020-0676Assessing people-driven factors for circular economy practices in SME supply chains: business strategies and environmental perspectives
Betuel Sawe, F, Kumar, A, Garza-Reyes, Jose Arturo and Agrawal, R 2021. Assessing people-driven factors for circular economy practices in SME supply chains: business strategies and environmental perspectives. Business Strategy and the Environment. 30 (7), pp. 2951-2965. https://doi.org/10.1002/bse.2781A Framework for Assessing Sustainability in Multi-tier Supply Chains using Empirical Evidence and Fuzzy Expert System
Shayganmehr, Masoud, Kumar, Anil, Lutha, Sunil and Garza-Reyes, Jose Arturo 2021. A Framework for Assessing Sustainability in Multi-tier Supply Chains using Empirical Evidence and Fuzzy Expert System. Journal of Cleaner Production. 317. https://doi.org/10.1016/j.jclepro.2021.128302Lean accounting: a structured literature review
Rafael Figueira Alves, Julio Vieira Neto, Daniel Luiz de Mattos Nascimento, Flavio Ezequiel de Andrade, Guilherme Luz Tortorella and Jose Arturo Garza-Reyes 2021. Lean accounting: a structured literature review. Emerald. https://doi.org/10.1108/tqm-06-2021-0185Enhancing resiliency of perishable product supply chains in the context of the COVID-19 outbreak
Shanker, S, Barve, A, Mudulib, K, Kumar, A and Garza-Reyes, Jose Arturo 2021. Enhancing resiliency of perishable product supply chains in the context of the COVID-19 outbreak. International Journal of Logistics Research and Applications: A Leading Journal of Supply Chain Management. https://doi.org/10.1080/13675567.2021.1893671An Analysis of Operational Behavioural Factors and Circular Economy Practices in SMEs: An Emerging Economy Perspective
Luthra, S., Kumar, A., Sharma, M., Garza-Reyes, Jose Arturo and Kumar, V. 2021. An Analysis of Operational Behavioural Factors and Circular Economy Practices in SMEs: An Emerging Economy Perspective. Journal of Business Research. 141, pp. 1-16. https://doi.org/10.1016/j.jbusres.2021.12.014Analysis of critical success factors for implementing Industry 4.0 integrated circular supply chain – moving towards sustainable operations
Anil Kumar, Sangita Choudhary, Jose Arturo Garza-Reyes, Vikas Kumar, Syed Abdul Rehman Khan and Nishikant Mishra 2021. Analysis of critical success factors for implementing Industry 4.0 integrated circular supply chain – moving towards sustainable operations. Production Planning & Control. 34 (10), pp. 1-15. https://doi.org/10.1080/09537287.2021.1980905A systematic literature review regarding the influence of lean manufacturing on firms' financial performance
Marcos Dieste, Roberto Panizzolo and Jose Arturo Garza-Reyes 2021. A systematic literature review regarding the influence of lean manufacturing on firms' financial performance. Emerald. https://doi.org/10.1108/jmtm-08-2020-0304Challenges in the implementation of lean manufacturing in the wood and furniture industry
Falah Abu, Muhamad Zameri Mat Saman, Jose Arturo Garza-Reyes, Hamed Gholami and Norhayati Zakuan 2021. Challenges in the implementation of lean manufacturing in the wood and furniture industry. Journal of Manufacturing Technology Management. https://doi.org/10.1108/jmtm-01-2021-0029Exploring the Challenges of Electric Vehicle Adoption in Final Mile Parcel Delivery
Anosike, Anthony, Loomes, H, Udokporo, C.K. and Garza-Reyes, Jose Arturo 2021. Exploring the Challenges of Electric Vehicle Adoption in Final Mile Parcel Delivery. International Journal of Logistics Research and Applications. https://doi.org/10.1080/13675567.2021.1978409Circular economy: a conceptual model to measure readiness for manufacturing SMEs
John Thorley, Jose Arturo Garza-Reyes and Anthony Anosike 2021. Circular economy: a conceptual model to measure readiness for manufacturing SMEs. Benchmarking: An International Journal. 29 (4), pp. 1-29. https://doi.org/10.1108/bij-03-2021-0161Impact of I4.0 technologies and their interoperability on performance: future pathways for supply chain resilience post-COVID-19
Guilherme F. Frederico, Vikas Kumar, Jose Arturo Garza-Reyes, Anil Kumar and Rohit Agrawal 2021. Impact of I4.0 technologies and their interoperability on performance: future pathways for supply chain resilience post-COVID-19. The International Journal of Logistics Management. https://doi.org/10.1108/ijlm-03-2021-0181Improving the sustainability of food supply chains through circular economy practices – a qualitative mapping approach
Luciano Batista, Manoj Dora, Jose Arturo Garza-Reyes and Vikas Kumar 2021. Improving the sustainability of food supply chains through circular economy practices – a qualitative mapping approach. Management of Environmental Quality: An International Journal. 32 (4). https://doi.org/10.1108/meq-09-2020-0211How selection of collaborating partners impact on the green performance of global businesses? An empirical study of green sustainability
Ramanathan, U., Mazolla, E., Mohan, U., Bruccoleri, M., Awasthi, A., Garza-Reyes, J.A. 2021. How selection of collaborating partners impact on the green performance of global businesses? An empirical study of green sustainability. Production Planning & Control. 32 (14), pp. 1207-1222. https://doi.org/10.1080/09537287.2020.1796133Assessing the key enablers for Industry 4.0 adoption using MICMAC analysis: a case study
Srijit Krishnan, Sumit Gupta, Mathiyazhagan Kaliyan, Vikas Kumar and Jose Arturo Garza-Reyes 2021. Assessing the key enablers for Industry 4.0 adoption using MICMAC analysis: a case study. International Journal of Productivity and Performance Management. https://doi.org/10.1108/ijppm-02-2020-0053Machine learning applications for sustainable manufacturing: a bibliometric-based review for future research
Anbesh Jamwal, Rajeev Agrawal, Monica Sharma, Anil Kumar, Vikas Kumar and Garza-Reyes, J. 2021. Machine learning applications for sustainable manufacturing: a bibliometric-based review for future research. Journal of Enterprise Information Management. https://doi.org/10.1108/jeim-09-2020-0361A readiness self-assessment model for implementing Green Lean Initiatives
Cherrafi, Anass, Garza-Reyes, Jose Arturo, Belhadi, Amine, Kamble, S.S and Elbaz, Jamal 2021. A readiness self-assessment model for implementing Green Lean Initiatives. Journal of Cleaner Production. 309. https://doi.org/10.1016/j.jclepro.2021.127401An Empirical Examination of Benefits, Challenges, and Critical Success Factors of Industry 4.0 in Manufacturing and Service Sector
Sony, M, Antony, J, McDermott, O and Garza-Reyes, Jose Arturo 2021. An Empirical Examination of Benefits, Challenges, and Critical Success Factors of Industry 4.0 in Manufacturing and Service Sector. Technology in Society. 67. https://doi.org/10.1016/j.techsoc.2021.101754Lean Manufacturing and Internet of Things – A Synergetic or Antagonist Relationship?
Anosike, Anthony, Alafropatis, Konstantinos, Garza-Reyes, Jose Arturo, Kumar, Anil, Luthra, Sunil and Rocha-Lona, Luis 2021. Lean Manufacturing and Internet of Things – A Synergetic or Antagonist Relationship? Computers in Industy. 129, pp. 1-15. https://doi.org/10.1016/j.compind.2021.103464A review of challenges and opportunities of blockchain adoption for operational excellence in the UK automotive Industry
Upadhyay, Arvind, Ayodele, J, Kumar, Anil and Garza-Reyes, Jose Arturo 2020. A review of challenges and opportunities of blockchain adoption for operational excellence in the UK automotive Industry. Journal of Global Operations and Strategic Sourcing. https://doi.org/10.1108/JGOSS-05-2020-0024Industry 4.0 enablers for a cleaner production and circular economy within the context of business ethics: a study in a developing country
Shayganmehr, Masoud, Kumar, Anil, Garza-Reyes, Jose Arturo and Moktadir, Abdul 2020. Industry 4.0 enablers for a cleaner production and circular economy within the context of business ethics: a study in a developing country. Journal of Cleaner Production. https://doi.org/10.1016/j.jclepro.2020.125280Fostering economic growth, social inclusion and sustainability in industry 4.0: a systemic approach
Mendoza-del Villar, L, Oliva-Lopez, E, Luis-Pineda, O, Benešová, A, Tupa, J and Garza-Reyes, Jose Arturo 2020. Fostering economic growth, social inclusion and sustainability in industry 4.0: a systemic approach. Procedia Manufacturing. https://doi.org/10.1016/j.promfg.2020.10.244Sustainability adoption through sustainable human resource management: a systematic literature review and conceptual framework
Kumar, Anil, Bhaskar, Preeti, Nadeem, Simon Peter, Tyagi, Mrinal and Garza-Reyes, Jose Arturo 2020. Sustainability adoption through sustainable human resource management: a systematic literature review and conceptual framework. International Journal of Mathematical, Engineering and Management Sciences. https://doi.org/10.33889/IJMEMS.2020.5.6.078Benchmarking of sustainability to assess practices and performances of the management of the end of life cycle of electronic products: a study of Brazilian manufacturing companies
Gonçalves da Costa, L., Espíndola Ferreira, J.C., Kumar, V., Garza-Reyes, J.A. 2020. Benchmarking of sustainability to assess practices and performances of the management of the end of life cycle of electronic products: a study of Brazilian manufacturing companies. Clean Technologies and Environmental Policy. https://doi.org/10.1007/s10098-020-01947-3Specialized business incubators as a strategy for small and medium-sized enterprises in the industry 4.0 era – a systemic approach
Bosques-Brugada, G., Mendoza-del Villar, L.A., Oliva-López, E., Garza-Reyes, J.A., Tupa, J. 2020. Specialized business incubators as a strategy for small and medium-sized enterprises in the industry 4.0 era – a systemic approach. IEOM Society.Supplier selection for smart supply chain: An adaptive fuzzy-neuro approach
Zekhnini, K., Cherrafi, A., Bouhaddou, I., Benghabrit, Y., Garza-Reyes, J.A. 2020. Supplier selection for smart supply chain: An adaptive fuzzy-neuro approach. IEOM Society.Achieving resilience in the supply chain by applying IoT technology
Al-Talib, M., Melhem, W.Y., Anosike, A.I., Garza-Reyes, J.A., Nadeem, S.P., Kumar, A. 2020. Achieving resilience in the supply chain by applying IoT technology. Procedia CIRP. https://doi.org/10.1016/j.procir.2020.02.231Managing operations for circular economy in the mining sector: An analysis of barriers intensity
Rajesh, Singh, Kumar, Anil, Garza-Reyes, Jose Arturo and M.de Sác, Marcelo 2020. Managing operations for circular economy in the mining sector: An analysis of barriers intensity. Resources Policy. https://doi.org/10.1016/j.resourpol.2020.101752Analysis and prioritization of lean six sigma enablers with environmental facets using best worst method: A case of Indian MSMEs
Singh, M, Rathi, R and Garza-Reyes, Jose Arturo 2020. Analysis and prioritization of lean six sigma enablers with environmental facets using best worst method: A case of Indian MSMEs. Journal of Cleaner Production. https://doi.org/10.1016/j.jclepro.2020.123592Fuzzy rule-based industry 4.0 maturity model for manufacturing and supply chain management operations
Caiado, R.G.G., Scavarda, L.F., Gavião, L.O., Ivson, P, de Mattos Nascimento, D.L. and Garza-Reyes, Jose Arturo 2020. Fuzzy rule-based industry 4.0 maturity model for manufacturing and supply chain management operations. International Journal of Production Economics. https://doi.org/10.1016/j.ijpe.2020.107883A framework to achieve sustainability in manufacturing organisations of developing economies using Industry 4.0 technologies’ enablers
Yadav, G, Kumar, Anil, Luthra, S, Garza-Reyes, Jose Arturo, Kumar, V and Batista, L 2020. A framework to achieve sustainability in manufacturing organisations of developing economies using Industry 4.0 technologies’ enablers. Computers in Industy. https://doi.org/10.1016/j.compind.2020.103280Organisational learning and industry 4.0: Findings from a systematic literature review and research agenda
Belinski, Ricardo, Peixe, Adriana M.M., Frederico, Guilherme F. and Garza-Reyes, Jose Arturo 2020. Organisational learning and industry 4.0: Findings from a systematic literature review and research agenda. Benchmarking: An International Journal. https://doi.org/10.1108/BIJ-04-2020-0158Benchmarking of cleaner production in sand mould casting companies
Guilherme da Silva, H, Espíndola Ferreira, J.C, Vikas, K and Garza-Reyes, J.A. 2020. Benchmarking of cleaner production in sand mould casting companies. Management of Environmental Quality. https://doi.org/10.1108/MEQ-12-2019-0272Decision making for risk evaluation: integration of prospect theory with failure modes and effects analysis (FMEA)
Sagnak, M, Kazancoglu, Y, Ozkan Ozen, Y.D and Garza-Reyes, J.A. 2020. Decision making for risk evaluation: integration of prospect theory with failure modes and effects analysis (FMEA). International Journal of Quality and Reliability Management. https://doi.org/10.1108/IJQRM-01-2020-0013Assessing systematic literature review bias: kaizen events in hospitals case study
Gonzalez Aleu, Flores, F.F., Perez, J., Gonzalez, R., Garza-Reyes, J.A. 2020. Assessing systematic literature review bias: kaizen events in hospitals case study. IEOM Society.A multi-objective linear optimization model for designing sustainable closed-loop agricultural supply chain
Reyhani Yamchi, Hossein, Jabarzadeh, Younis, Ghaffarinasab, Nader, Kumar, Vikas and Garza-Reyes, J.A. 2020. A multi-objective linear optimization model for designing sustainable closed-loop agricultural supply chain. IEOM Society.Eco-innovation practices’ adoption in the automotive industry
Maldonado-Guzman, G and Garza-Reyes, Jose Arturo 2020. Eco-innovation practices’ adoption in the automotive industry. International Journal of Innovation Science. https://doi.org/10.1108/IJIS-10-2019-0094Learning orientation and innovation performance: the mediating role of operations strategy and supply chain integration
Kumar, Vikas, Jabarzadeh, Younis, Jeihouni, Paria and Garza-Reyes, Jose Arturo 2020. Learning orientation and innovation performance: the mediating role of operations strategy and supply chain integration. Supply Chain Management: An International Journal. https://doi.org/10.1108/SCM-05-2019-0209Performance factors for successful business incubators in Indonesian public universities
Gozali, Lina, Masrom, Maslin, Zagloel, Teuku Yuri M., Haron, Habibah N., Garza-Reyes, Jose Arturo, Tjahjono, Benny, Purna Irawan, Agustinus, Daywin, Frans Jusuf, Syamas, Asril Fitri, Susanto, Sani, Harry, Kusuma Kiwi Aliwarga and Anne Marie, Iveline 2020. Performance factors for successful business incubators in Indonesian public universities. International Journal of Technology. https://doi.org/10.14716/ijtech.v11i1.2464Behavioural factors on the adoption of sustainable supply chain practices
Kumar, Anil, Moktadir, Md. Abdul, Rehman Khan, Syed Abdul, Garza-Reyes, Jose Arturo, Tyagi, Mrinal and Kazançoğlu, Yiğit 2020. Behavioural factors on the adoption of sustainable supply chain practices. Resources, Conservation & Recycling. https://doi.org/10.1016/j.rcrx.2020.100031Organizational learning and Industry 4.0: findings from a systematic literature review and research agenda
Ricardo Belinski, Adriana M.M. Peixe, Guilherme F. Frederico and Jose Arturo Garza-Reyes 2020. Organizational learning and Industry 4.0: findings from a systematic literature review and research agenda. Benchmarking: An International Journal. 27 (8). https://doi.org/10.1108/bij-04-2020-0158The role of organizational motivation and coordination in continuous improvement implementations: an empirical research of improvement project success
Lameijer, B, Antony, J, Chakraborty, A, Does, R.J.M.M. and Garza-Reyes, J.A. 2020. The role of organizational motivation and coordination in continuous improvement implementations: an empirical research of improvement project success. Total Quality Management & Business Excellence. 32 (13-14), pp. 1633-1649. https://doi.org/10.1080/14783363.2020.1757422Supply chain management 4.0: a literature review and research framework
Kamar Zekhnini, Anass Cherrafi, Imane Bouhaddou, Youssef Benghabrit and Jose Arturo Garza-Reyes 2020. Supply chain management 4.0: a literature review and research framework. Benchmarking: An International Journal. 28 (2). https://doi.org/10.1108/bij-04-2020-0156An MCDA cause-effect factors model for the implementation of Greenstone Digital Library software
Somvir Rathee, Anil Kumar, Sudha Kaushik, Edmundas Kazimieras Zavadskas, Audrius Banaitis and Jose Arturo Garza-Reyes 2020. An MCDA cause-effect factors model for the implementation of Greenstone Digital Library software. Management Decision. 58 (11). https://doi.org/10.1108/md-09-2019-1268A New Perspective of E-Trust in the Era of Social Media: Insights From Customer Satisfaction Data
Usha Ramanathan, Nigel L. Williams, Michael Zhang, Punyachalee Sa-nguanjin, Jose Arturo Garza-Reyes and Lilian Adriana Borges 2020. A New Perspective of E-Trust in the Era of Social Media: Insights From Customer Satisfaction Data. IEEE Transactions on Engineering Management. 69 (4). https://doi.org/10.1109/tem.2020.2985379Proposition of a method for stochastic analysis of value streams
Luz, G., Tortorella, G.L., Bouzon, M., Garza-Reyes, J. and Gaiardelli, P. 2020. Proposition of a method for stochastic analysis of value streams. Production Planning & Control. 33 (8), pp. 741-757. https://doi.org/10.1080/09537287.2020.1833377Developing a strategic sustainable facility plan for a hospital layout using ELECTRE and Apples procedure
Vimal, K.E.K, Kandasamy, Jayakrishna, Nadeem, Simon Peter, Kumar, Anil, Šaparauskas, Jonas, Garza-Reyes, Jose Arturo and Trinkūnienė, Eva 2020. Developing a strategic sustainable facility plan for a hospital layout using ELECTRE and Apples procedure. International Journal of Strategic Property Management. 25 (1), pp. 17-33. https://doi.org/10.3846/ijspm.2020.13733Performance measurement for supply chains in the Industry 4.0 era: a balanced scorecard approach
Guilherme Francisco Frederico, Jose Arturo Garza-Reyes, Anil Kumar and Vikas Kumar 2020. Performance measurement for supply chains in the Industry 4.0 era: a balanced scorecard approach. International Journal of Productivity and Performance Management. https://doi.org/10.1108/ijppm-08-2019-0400A systematic literature review of data science, data analytics and machine learning applied to healthcare engineering systems
Roberto Salazar-Reyna, Fernando Gonzalez-Aleu, Edgar M.A. Granda-Gutierrez, Jenny Diaz-Ramirez, Jose Arturo Garza-Reyes and Anil Kumar 2020. A systematic literature review of data science, data analytics and machine learning applied to healthcare engineering systems. Emerald. https://doi.org/10.1108/md-01-2020-0035Lean production myths: an exploratory study
Tarcisio Abreu Saurin, Guilherme Luz Tortorella, Marlon Soliman and Jose Arturo Garza-Reyes 2020. Lean production myths: an exploratory study. Journal of Manufacturing Technology Management. 32 (1). https://doi.org/10.1108/jmtm-08-2020-0302The adoption of environmentally sustainable supply chain management: Measuring the relative effectiveness of hard dimensions
Choudhary, Sangita, Kumar, Anil, Garza-Reyes, Jose Arturo and Nadeem, Simon Peter 2020. The adoption of environmentally sustainable supply chain management: Measuring the relative effectiveness of hard dimensions. Business Strategy and the Environment. 29 (8), pp. 3104-3122. https://doi.org/10.1002/bse.2560Impact of lean, agile and green (LAG) on business competitiveness: An empirical study of fast moving consumer goods businesses
Udokporo, C.K., Anosike, A.I., Lim, M.K., Nadeem, S.P., Garza-Reyes, J.A. and Ogbuka, C.P. 2020. Impact of lean, agile and green (LAG) on business competitiveness: An empirical study of fast moving consumer goods businesses. Resources, Conservation & Recycling. 156. https://doi.org/10.1016/j.resconrec.2020.104714Deploying Kaizen events in the manufacturing industry: An investigation into managerial factors
Garza-Reyes, J., Christopoulos, C., Kumar, A., Luthra, S., Gonzalez-Aleu, F., Kumar, V. and Villarreal, B. 2020. Deploying Kaizen events in the manufacturing industry: An investigation into managerial factors. Production Planning & Control. 33 (5), pp. 427-449. https://doi.org/10.1080/09537287.2020.1824282Eco-innovation and the circular economy in the automotive industry
Gonzalo Maldonado-Guzmán, Jose Arturo Garza-Reyes and Yesenia Pinzón-Castro 2020. Eco-innovation and the circular economy in the automotive industry. Benchmarking: An International Journal. 28 (2). https://doi.org/10.1108/bij-06-2020-0317Practical implications and future research agenda of lean manufacturing: a systematic literature review
Antony, J, Psomas, E, Garza-Reyes, J.A. and Hines, P 2020. Practical implications and future research agenda of lean manufacturing: a systematic literature review. Taylor & Francis. https://doi.org/10.1080/09537287.2020.1776410Supply chain 4.0: Concepts, maturity and research agenda
Frederico, G.F., Garza-Reyes, J.A., Anosike, A.I., Kumar, V. 2019. Supply chain 4.0: Concepts, maturity and research agenda. Supply Chain Management: An International Journal. https://doi.org/10.1108/SCM-09-2018-0339A lean six sigma framework for continuous and incremental improvement in the oil and gas sector
Nascimento, D. L. M, Goncalvez Quelhas, O. L., Gusmão Caiado, R. G., Tortorella, Guilherme, Garza-Reyes, J. A. and Rocha-Lona, L., Muñoz-Sanchez, C., Garza-Reyes, J.A., Kumar, V., Lopez-Torres, G.C. 2019. A lean six sigma framework for continuous and incremental improvement in the oil and gas sector. International Journal of Lean Six Sigma. https://doi.org/10.1108/IJLSS-02-2019-0011Integrated green lean approach and sustainability for SMEs: From literature review to a conceptual framework
Siegel, Rebecca, Antony, Jiju, Garza-Reyes, Jose, Cherrafi, Anass and Lameijer, Bart 2019. Integrated green lean approach and sustainability for SMEs: From literature review to a conceptual framework. Journal of Cleaner Production. https://doi.org/10.1016/j.jclepro.2019.118205The impact of learning orientation on innovation performance: mediating role of operations strategy and moderating role of environmental uncertainty
Jeihoony, P., Jabarzadeh, Y., Kumar, V., Garza-Reyes, J.A. 2019. The impact of learning orientation on innovation performance: mediating role of operations strategy and moderating role of environmental uncertainty. IEOM Society.Towards sustainable industrial development - a systems thinking-based approach
Mendoza-del Villar. L.A., Oliva-López, E., Luis-Pineda, O., Garza-Reyes, J.A. 2019. Towards sustainable industrial development - a systems thinking-based approach. IEOM Society.Use of clean technologies in agribusiness in Mexico: A literature review
Rocha-Lona, Jose Arturo L., Cuevas-Zuñiga, I.Y., Soto-Flores, M.R., Garza-Reyes, J.A., Kumar, V. 2019. Use of clean technologies in agribusiness in Mexico: A literature review. IEOM Society.Transport operations optimisation through lean implementation – a case study
Deesrisak, Jose Arturo N., Garza-Reyes, J.A., Nadeem, S.P., Kumar, A., Kumar, V., Gonzalez-Aleu, F., Vil-larreal, B. 2019. Transport operations optimisation through lean implementation – a case study. IEOM Society.Do human critical success factors matter in adoption of sustainable manufacturing practices? An influential mapping analysis of multi-company perspective
Ahuja, J, Kumar Panda, T, Luthra, S, Kumar, Anil, Choudhary, S and Garza-Reyes, Jose Arturo 2019. Do human critical success factors matter in adoption of sustainable manufacturing practices? An influential mapping analysis of multi-company perspective. Journal of Cleaner Production. https://doi.org/10.1016/j.jclepro.2019.117981Organizational learning paths based upon Industry 4.0 adoption: An empirical study with Brazilian manufacturers
Tortorella, Jose Arturo G.L., Cawley Vergara, A.M., Garza-Reyes, J.A., Sawhney, R. 2019. Organizational learning paths based upon Industry 4.0 adoption: An empirical study with Brazilian manufacturers. International Journal of Production Economics. https://doi.org/10.1016/j.ijpe.2019.06.023Understanding circular economy awareness and practices in manufacturing firms
Liakos, N., Kumar, V., Pongsakornrungsilp, S., Garza-Reyes, J.A., Gupta, B., Pongsakornrung-silp, P. 2019. Understanding circular economy awareness and practices in manufacturing firms. Journal of Enterprise Information Management. https://doi.org/10.1108/JEIM-02-2019-0058Do altruistic and egoistic values influence consumers’ attitude and purchase intention towards eco-friendly packaged products? An empirical investigation.
Prakash, G., Choudhary, S., Kumar, A., Garza-Reyes, J.A., Khan, S.A.R., Panda, T.K. 2019. Do altruistic and egoistic values influence consumers’ attitude and purchase intention towards eco-friendly packaged products? An empirical investigation. Journal of Retailing and Consumer Services. https://doi.org/10.1016/j.jretconser.2019.05.011Managing innovation and operations in the 21st century.
Garza-Reyes, J.A., Kumar, V., Martinez-Covarrubias, J.L. and Lim, M.K. 2017. Managing innovation and operations in the 21st century. CRC Press.Intelligent agriculture: developing a system for monitoring and controlling production.
Maldonado-Guzman, G., Garza-Reyes, J.A. and Solano-Romo, L.I. 2019. Intelligent agriculture: developing a system for monitoring and controlling production. Emerald Publishing Ltd..An investigation into some measures of manufacturing performance - Overall Equipment Effectiveness (OEE), Process Capability (PC), OEE+ and ORE
Garza-Reyes, J.A. 2010. An investigation into some measures of manufacturing performance - Overall Equipment Effectiveness (OEE), Process Capability (PC), OEE+ and ORE. LAP Lambert Academic Publishing.Building quality management systems: selecting the right methods and tools.
Rocha-Lona, L., Garza-Reyes, J.A. and Kumar, V. 2013. Building quality management systems: selecting the right methods and tools. CRC Press.International operations, innovation and sustainability.
Upadhyay, A., Vadam, C., Kumar, V. and Garza-Reyes, J.A. 2017. International operations, innovation and sustainability. Transnational Press London.Analysis forecast production model: a Mexican family firm proposal
Maldonado-Guzman, G., Garza-Reyes, J.A., Solano-Romo, L.I. 2019. Analysis forecast production model: a Mexican family firm proposal. Proceedings of the 9th International Conference on Industrial Engineering and Operations Management (IEOM).Aerospace industry in Queretaro, Mexico: a perspective of regional innovation system
Muñoz-Sanchez, C., Soto-Flores, M.R., Rocha-Lona, J., Garza-Reyes, J.A. 2019. Aerospace industry in Queretaro, Mexico: a perspective of regional innovation system. Proceedings of the 9th International Conference on Industrial Engineering and Operations Management (IEOM).A DMAIRC approach to lead time reduction in an aerospace engine assembly process
Garza-Reyes J.A., Flint, A., Kumar, V., Antony, J., Soriano-Meier, H. 2014. A DMAIRC approach to lead time reduction in an aerospace engine assembly process. Journal of Manufacturing Technology Management. https://doi.org/10.1108/JMTM-05-2012-0058Facilitating students’ (doctoral) transition to the workplace: A critical review
Upadhyay, A., Kumar, V., Garza-Reyes, J.A. 2019. Facilitating students’ (doctoral) transition to the workplace: A critical review. in: Routledge.Investigating innovation capability and organisational performance in service firms
Al-Kalouti, J., Kumar, V., Kumar, N., Garza-Reyes, J.A., Upadhyay, A., Zwiegelaar, J.B., Kumari, A. 2019. Investigating innovation capability and organisational performance in service firms. Briefings in Entrepreneurial Finance.Circular economy in the manufacturing sector: benefits, opportunities and barriers
Kumar, V., Sezersan, I., Garza-Reyes, J., Gonzalez, E. and AL-Shboul, M. 2019. Circular economy in the manufacturing sector: benefits, opportunities and barriers. Management Decision. https://doi.org/10.1108/MD-09-2018-1070Aerospace industry in México and biofuels: a sustainability approach
Rocha-Lona, L., Muñoz-Sanchez, C., Garza-Reyes, J.A., Kumar, V., Lopez-Torres, G.C. 2019. Aerospace industry in México and biofuels: a sustainability approach. International Journal of Smart Grid and Clean Energy. https://doi.org/10.12720/sgce.8.2.206-216Lean readiness within emergency departments: A conceptual framework
Al-Najem, Mohammed, Garza-Reyes, J.A. and Antony, J. 2019. Lean readiness within emergency departments: A conceptual framework. Benchmarking: An International Journal.The relationship between lean and environmental performance: practices and measures
Dieste, M., Panizzolo, R., Garza-Reyes, J.A., Anosike, A.I. 2019. The relationship between lean and environmental performance: practices and measures. Journal of Cleaner Production. https://doi.org/10.1016/j.jclepro.2019.03.243The adoption of operational environmental sustainability approaches in the Thai manufacturing sector
Piyathanavong, V., Garza-Reyes, J.A., Kumar, V., Maldonado-Guzman, G., Kumar Mangla, S. 2019. The adoption of operational environmental sustainability approaches in the Thai manufacturing sector. Journal of Cleaner Production. https://doi.org/10.1016/j.jclepro.2019.02.093Social and environmental sustainability model on consumers’ altruism, green purchase intention, green brand loyalty, and evangelism
Panda, T. K., Kumar, Anil, Jakhar, S, Luthra, S, Garza-Reyes, J. A., Kazancoglu, I and Nayak, S.S. 2019. Social and environmental sustainability model on consumers’ altruism, green purchase intention, green brand loyalty, and evangelism. Journal of Cleaner Production. 243, pp. 1-11. https://doi.org/10.1016/j.jclepro.2019.118575Green and lean: a Gemba–Kaizen model for sustainability enhancement
Anass Cherrafi, Said Elfezazi, Brion Hurley, Jose Arturo Garza-Reyes, Vikas Kumar, Anthony Anosike and Luciano Batista 2019. Green and lean: a Gemba–Kaizen model for sustainability enhancement. Production Planning & Control. 30 (5-6), pp. 385-399. https://doi.org/10.1080/09537287.2018.1501808Optimisation of a distribution system in the retail industry: An Australian retail industry
Amjad, M., Daniel, J. and Garza-Reyes, J.A. 2019. Optimisation of a distribution system in the retail industry: An Australian retail industry. 9th International Conference on Industrial Engineering and Operations Management (IEOM). IEOM Society.The circular economy impact on small to medium enterprises
Thorley, J., Garza-Reyes, J.A., Anosike, A. 2019. The circular economy impact on small to medium enterprises. WIT Transactions on Ecology and the Environment. 231, pp. 257 - 267. https://doi.org/10.2495/WM180241From linear to circular manufacturing business models
Jose Arturo Garza-Reyes, Vikas Kumar, Luciano Batista, Anass Cherrafi and Luis Rocha-Lona 2019. From linear to circular manufacturing business models. Journal of Manufacturing Technology Management. 30 (3). https://doi.org/10.1108/jmtm-04-2019-356Improving the Reliability of Warehouse Operations in the 3PL Industry: An Australian 3PL Case Study
Ho, T.H.D., Daniel, J., Nadeem, S.P., Garza-Reyes, J.A. and Kumar, V. 2019. Improving the Reliability of Warehouse Operations in the 3PL Industry: An Australian 3PL Case Study. 2018 International Conference on Production and Operations Management Society, POMS 2018. IEEE. https://doi.org/10.1109/poms.2018.8629453Evaluating the impact of lean practices on environmental performance: evidences from five manufacturing companies
Dieste, M, Panizzolo, R and Garza-Reyes, J. A. 2019. Evaluating the impact of lean practices on environmental performance: evidences from five manufacturing companies. Production Planning and Control: The Management of Operations. 31 (9), pp. 739-756. https://doi.org/10.1080/09537287.2019.1681535Measuring operational excellence: an operational excellence profitability (OEP) approach.
Gólcher-Barguil, L.A., Nadeem, S. and Garza-Reyes, J.A. 2019. Measuring operational excellence: an operational excellence profitability (OEP) approach. Production Planning and Control: The Management of Operations. 30 (8), pp. 682-698. https://doi.org/10.1080/09537287.2019.1580784Industry 4.0 as enabler of sustainability diffusion in supply chain: analysis of influential strength of drivers in emerging economy
Luthra, S, Kumar, Anil, Zavadskas, E, Mangla, S and Garza-Reyes, Jose Arturo 2019. Industry 4.0 as enabler of sustainability diffusion in supply chain: analysis of influential strength of drivers in emerging economy. International Journal of Production Research. 58 (5), pp. 1505-1521. https://doi.org/10.1080/00207543.2019.1660828Measuring the lean readiness of Kuwaiti manufacturing industries.
Al-Najem, Mohammed, Garza-Reyes, Jose Arturo and ElMelegy, Ahmed 2018. Measuring the lean readiness of Kuwaiti manufacturing industries. International Journal of Business Performance Management. https://doi.org/10.1504/IJBPM.2019.096467Exploring industry 4.0 technologies to enable circular economy practices in a manufacturing context: a business model proposal.
Nascimento, D.L.M, Alencastro, V, Quelhas, O.L.G, Caiado, R.G.G, Garza-Reyes, Jose Arturo and Tortorella, G.L 2018. Exploring industry 4.0 technologies to enable circular economy practices in a manufacturing context: a business model proposal. Journal of Manufacturing Technology Management. https://doi.org/10.1108/JMTM-03-2018-0071Mapping the human resource focused enablers with sustainability viewpoints in Indian power sector.
Yadav, Mohit, Kumar, Anil, Mangla, Sachin Kumar, Luthra, Sunil, Bamel, Umesh and Garza-Reyes, Jose Arturo 2018. Mapping the human resource focused enablers with sustainability viewpoints in Indian power sector. Journal of Cleaner Production. https://doi.org/10.1016/j.jclepro.2018.11.132An empirical analysis of supply and manufacturing risk and business performance: a Chinese manufacturing supply chain perspective.
Kumar, Vikas, Guo, Ruizhi, Shaw, Sarah Louise, Colicchia, Claudia, Garza-Reyes, Jose Arturo, Kumari, Archana and Bak, Ozlem 2018. An empirical analysis of supply and manufacturing risk and business performance: a Chinese manufacturing supply chain perspective. Supply Chain Management: An International Journal. https://doi.org/10.1108/SCM-10-2017-0319Lean, green practices and process innovation: a model for green supply chain performance.
Cherrafi, Anass, Garza-Reyes, Jose Arturo, Kumar, Vikas, Mishra, Nishikant, Ghobadian, Abby and Elfezazi, Said 2018. Lean, green practices and process innovation: a model for green supply chain performance. International Journal of Production Economics.Decision modeling for evaluating risks in pharmaceutical supply chains
Moktadir, M. A., Ali, S, Kumar Mangla, S, Sharmy, T, Luthra, S, Mishra, N and Garza-Reyes, Jose Arturo 2018. Decision modeling for evaluating risks in pharmaceutical supply chains. Industrial Management & Data Systems. https://doi.org/10.1108/IMDS-10-2017-0465Investigating the benefits and challenges of Total Quality Management implementation in the pharmaceutical companies
Petliushenko, Kateryna, Kumar, Vikas, Zwiegelaar, Jeremy, Loonam, John and Garza-Reyes, Jose A. 2018. Investigating the benefits and challenges of Total Quality Management implementation in the pharmaceutical companies. Proceedings of the 2018 British Academy of Management (BAM) Conference.Prioritisation of operations improvement projects in the European manufacturing industry.
Kirkham, Louis, Garza-Reyes, Jose Arturo, Kumar, Vikas and Antony, Ji 2014. Prioritisation of operations improvement projects in the European manufacturing industry. International Journal of Production Research. https://doi.org/10.1080/00207543.2014.903345A conceptual framework for the implementation of quality management systems
Garza-Reyes, Jose Arturo, Rocha-Lona, Luis and Kumar, Vikas 2014. A conceptual framework for the implementation of quality management systems. Total Quality Management & Business Excellence. https://doi.org/10.1080/14783363.2014.929254An integrated approach of six sigma and QSAM methodologies for a pharmaceutical company: a shipment improvement process.
Rocha-Lona, Luis, Alvarez- Reyes, Silvia Edith, Garza-Reyes, Jose Arturo and Kumar, Vikas 2015. An integrated approach of six sigma and QSAM methodologies for a pharmaceutical company: a shipment improvement process. International Journal of Lean Enterprise Research. https://doi.org/10.1504/IJLER.2015.071743From measuring overall equipment effectiveness (OEE) to overall resource effectiveness (ORE).
Garza-Reyes, Jose Arturo 2015. From measuring overall equipment effectiveness (OEE) to overall resource effectiveness (ORE). Journal of Quality in Maintenance Engineering. https://doi.org/10.1108/JQME-03-2014-0014Green lean and the need for six sigma.
Garza-Reyes, Jose Arturo 2015. Green lean and the need for six sigma. International Journal of Lean Six Sigma. https://doi.org/10.1108/IJLSS-04-2014-0010Measuring lean readiness through the understanding of quality practices in the Turkish automotive suppliers industry.
Garza-Reyes, Jose Arturo, Ates, Emre Mehmet and Kumar, Vikas 2015. Measuring lean readiness through the understanding of quality practices in the Turkish automotive suppliers industry. International Journal of Productivity and Performance Management. https://doi.org/10.1108/IJPPM-09-2014-0136Towards a conceptual roadmap for statistical process control implementation in the food industry.
Abdul Halim Lim, Sarina, Antony, Ji, Garza-Reyes, Jose Arturo and Arshed, Norin 2015. Towards a conceptual roadmap for statistical process control implementation in the food industry. Trends in Food Science & Technology. https://doi.org/10.1016/j.tifs.2015.03.002A multi-agent architecture for outsourcing SMEs manufacturing supply chain.
Kumari, Sushma, Singh, Akshit, Mishra, Nishikant and Garza-Reyes, Jose Arturo 2015. A multi-agent architecture for outsourcing SMEs manufacturing supply chain. Robotics and Computer-Integrated Manufacturing. https://doi.org/10.1016/j.rcim.2014.12.009Developing green supply chain management taxonomy-based decision support system.
Kumar, Vikas, Holt, Diane, Ghobadian, Abby and Garza-Reyes, Jose Arturo 2014. Developing green supply chain management taxonomy-based decision support system. International Journal of Production Research. https://doi.org/10.1080/00207543.2014.917215Innovation capabilities and performance: Are they truly linked in SMEs?
Maldonado-Guzman, Gonzalo, Garza-Reyes, Jose Arturo, Pinzon-Castro, Sandra Yesenia and Kumar, Vikas 2018. Innovation capabilities and performance: Are they truly linked in SMEs? International Journal of Innovation Science. https://doi.org/10.1108/IJIS-12-2017-0139Improve an emergency medical system capacity with theory of constraints.
Villarreal, Bernardo, Diaz Ramirez, Jenny, Carranza, Aracely, Morales, Gabriela, Quezada, Arturo and Garza-Reyes, Jose Arturo 2018. Improve an emergency medical system capacity with theory of constraints. IEOM Society.Investigating supply chain performance and supply chain integration linkage in Jordanian manufacturing firms.
Kumar, Vikas, Zeidan, Jack, Kumari, Archana, Garza-Reyes, Jose Arturo and Tupa, Jiri 2018. Investigating supply chain performance and supply chain integration linkage in Jordanian manufacturing firms. IEOM Society.Supply chain risk perception: understanding the gap between theory and practice.
Adebola Adeseun, Maria, Anosike, Anthony, Garza-Reyes, Jose Arturo and Al-Talib, Moayad 2018. Supply chain risk perception: understanding the gap between theory and practice. International Federation of Automatic Control.Examining legitimatisation of additive manufacturing in the interplay between innovation, lean manufacturing and sustainability.
Ghobadian, Abby, Talavera, Irene, Bhattacharya, Arijit, Kumar, Vikas, Garza-Reyes, Jose Arturo and O'Regan, Nicholas 2018. Examining legitimatisation of additive manufacturing in the interplay between innovation, lean manufacturing and sustainability. International Journal of Production Economics. https://doi.org/10.1016/j.ijpe.2018.06.001The challenges of the circular economy
Nadeem, S., Garza-Reyes, J. and Glanville, D. Conway, E. and Byrne, D. (ed.) 2018. The challenges of the circular economy. Springer.The effect of lean methods and tools on the environmental performance of manufacturing organisations.
Garza-Reyes, Jose Arturo, Kumar, Vikas, Chaikittisilp, Sariya and Tan, Kim Hua 2018. The effect of lean methods and tools on the environmental performance of manufacturing organisations. International Journal of Production Economics. https://doi.org/10.1016/j.ijpe.2018.03.030An analysis of managerial factors affecting the implementation and use of overall equipment effectiveness.
Binti Aminuddin, Nur Ainunnazli, Garza-Reyes, Jose Arturo, Kumar, Vikas, Antony, Jiju and Rocha-Lona, Luis 2015. An analysis of managerial factors affecting the implementation and use of overall equipment effectiveness. International Journal of Production Research. https://doi.org/10.1080/00207543.2015.1055849Reduce turnaround time through waste elimination.
Villarreal, Bernardo, Garza-Reyes, Jose Arturo, Aleu, Fernando Gonzalez, Quezada, Arturo, Morales, Gabriela and Carranza, Aracely 2018. Reduce turnaround time through waste elimination. Proceedings of the 8th International Conference on Industrial Engineering and Operations Management (IEOM).The impact of lean methods and tools on the operational performance of manufacturing organisations.
Belekoukias, Ioannis, Garza-Reyes, Jose Arturo and Kumar, Vikas 2014. The impact of lean methods and tools on the operational performance of manufacturing organisations. International Journal of Production Research. https://doi.org/10.1080/00207543.2014.903348Towards a life cycle sustainability analysis: A systematic review of approaches to sustainable manufacturing.
Gbededo, Mijoh Ayodele, Liyanage, Kapila and Garza-Reyes, Jose Arturo 2018. Towards a life cycle sustainability analysis: A systematic review of approaches to sustainable manufacturing. Journal of Cleaner Production. https://doi.org/10.1016/j.jclepro.2018.02.310Using the Delphi method to verify a framework to implement sustainability initiatives.
Gallotta, Bruno, Garza-Reyes, Jose Arturo and Anosike, Anthony 2018. Using the Delphi method to verify a framework to implement sustainability initiatives. IEOM Society.A PDCA-based approach to Environmental Value Stream Mapping (E-VSM)
Garza-Reyes, Jose Arturo, Torres Romero, Joseth, Govindan, Kannan, Cherrafi, Anass and Ramanathan, Usha 2018. A PDCA-based approach to Environmental Value Stream Mapping (E-VSM). Journal of Cleaner Production. https://doi.org/10.1016/j.jclepro.2018.01.121A lean and cleaner production benchmarking method for sustainability assessment: A study of manufacturing companies in Brazil.
Ramos, Aline Ribeiro, Ferreira, João Carlos Espíndola, Kumar, Vikas, Garza-Reyes, Jose Arturo and Cherrafi, Anass 2017. A lean and cleaner production benchmarking method for sustainability assessment: A study of manufacturing companies in Brazil. Journal of Cleaner Production. https://doi.org/10.1016/j.jclepro.2017.12.145Lean readiness – the case of the European pharmaceutical manufacturing industry
Jose Arturo Garza-Reyes, Ioannis E. Betsis, Vikas Kumar and Moh’d Anwer Radwan Al-Shboul 2018. Lean readiness – the case of the European pharmaceutical manufacturing industry. International Journal of Productivity and Performance Management. https://doi.org/10.1108/ijppm-04-2016-0083Sustainable stochastic production and procurement problem for resilient supply chain
Kaur, Harpreet, Singh, Surya Prakash, Garza-Reyes, Jose Arturo and Mishra, Nishikant 2018. Sustainable stochastic production and procurement problem for resilient supply chain. Computers & Industrial Engineering. 139. https://doi.org/10.1016/j.cie.2018.12.007A circularity measurement toolkit for manufacturing SMEs.
Garza-Reyes, Jose Arturo, Valls, Ailin Salomé, Nadeem, Simon Peter, Anosike, Anthony and Kumar, Vikas 2018. A circularity measurement toolkit for manufacturing SMEs. International Journal of Production Research. 57 (23), pp. 7319-7343. https://doi.org/10.1080/00207543.2018.1559961Towards a more circular economy: exploring the awareness, practices, and barriers from a focal firm perspective
Masi, Donato, Kumar, V., Garza-Reyes, J. and Godsell, Janet 2018. Towards a more circular economy: exploring the awareness, practices, and barriers from a focal firm perspective. Production Planning & Control. 29 (6), pp. 539-550. https://doi.org/10.1080/09537287.2018.1449246A lean transportation approach for improving emergency medical operations.
Villarreal, Bernardo, Garza-Reyes, Jose Arturo, Granda-Gutiérrez, Edgar, Kumar, Vikas and Lankenau-Delgado, Samantha 2018. A lean transportation approach for improving emergency medical operations. Production Planning & Control. 29 (11), pp. 928-942. https://doi.org/10.1080/09537287.2018.1494343A lean-TOC approach for improving emergency medical services (EMS) transport and logistics operations
Garza-Reyes, J. A., Villarreal, B., Kumar, V. and Diaz-Ramirez, J. 2018. A lean-TOC approach for improving emergency medical services (EMS) transport and logistics operations. International Journal of Logistics Research and Applications. 22 (3), pp. 253-272. https://doi.org/10.1080/13675567.2018.1513997Best supply chain management practices and high-performance firms
Moh’d Anwer AL-Shboul, Jose Arturo Garza-Reyes and Vikas Kumar 2018. Best supply chain management practices and high-performance firms. International Journal of Productivity and Performance Management. 67 (9). https://doi.org/10.1108/ijppm-11-2016-0257Measuring business sustainability maturity-levels and best practices
Meza-Ruiz, Itzel D., Rocha-Lona, Luis, del Rocío Soto-Flores, María, Garza-Reyes, Jose Arturo, Kumar, Vikas and Lopez-Torres, Gabriela Citlalli 2017. Measuring business sustainability maturity-levels and best practices. Procedia Manufacturing. https://doi.org/10.1016/j.promfg.2017.07.176The impact of supply chain integration on performance: Evidence from the UK food sector
Kumar, Vikas, Chibuzo, Esinaulo Nwakama, Garza-Reyes, Jose Arturo, Kumari, Archana, Rocha-Lona, Luis and Lopez-Torres, Gabriela Citlalli 2017. The impact of supply chain integration on performance: Evidence from the UK food sector. Procedia Manufacturing. https://doi.org/10.1016/j.promfg.2017.07.183Improving road transport operations using lean thinking
Garza-Reyes, Jose Arturo, Forero, Juan Sebastian Beltran, Kumar, Vikas, Villarreal, Bernardo, Cedillo-Campos, Miguel Gaston and Rocha-Lona, Luis 2017. Improving road transport operations using lean thinking. Procedia Manufacturing. https://doi.org/10.1016/j.promfg.2017.07.332Lean manufacturing and environmental performance – exploring the impact and relationship
Nadeem, Simon Peter, Garza-Reyes, Jose Arturo, Leung, Sin-Ching, Cherrafi, Anass, Anosike, Anthony and Lim, Ming K. 2017. Lean manufacturing and environmental performance – exploring the impact and relationship. Springer. https://doi.org/10.1007/978-3-319-66926-7_38Service innovation and performance in Mexican service SMEs
Maldonado-Guzman, Gonzalo, Garza-Reyes, Jose Arturo, Rocha-Lona, Luis and Kumar, Vikas 2017. Service innovation and performance in Mexican service SMEs. Springer. https://doi.org/10.1007/978-3-319-66926-7_27Lean emergency medical operations
Villarreal, Bernardo, Granda, Edgar, Lankenau, Andrea Montalvo, Bastidas, Ana Cristina and Garza-Reyes, Jose Arturo 2017. Lean emergency medical operations. Industrial Engineering and Operations Management (IEOM) Society.A lean transportation approach for reducing distribution cost: A case study
Villarreal, Bernardo, Garza-Reyes, Jose Arturo, Ocañas, Priscila and Martinez, Fernanda 2017. A lean transportation approach for reducing distribution cost: A case study. IEEE.Using BPM to improve sustainability in biomass generation
Gollotta, Bruno, Kolelas. Vidrene, Garza-Reyes, Jose Arturo, Anosike, Anthony and Kumar, Vikas 2017. Using BPM to improve sustainability in biomass generation. Industrial Engineering and Operations Management (IEOM) Society.Barriers in green lean implementation: a combined systematic literature review and interpretive structural modelling approach
Cherrafi, Anass, Elfezazi, Said, Garza-Reyes, Jose Arturo, Benhida, Khalid and Mokhlis, Ahmed 2017. Barriers in green lean implementation: a combined systematic literature review and interpretive structural modelling approach. Production Planning and Control: The Management of Operations. https://doi.org/10.1080/09537287.2017.1324184A systematic approach to diagnose the current status of quality management systems and business processes
Garza-Reyes, Jose Arturo 2017. A systematic approach to diagnose the current status of quality management systems and business processes. Business Process Management Journal. https://doi.org/10.1108/BPMJ-12-2016-0248A lean environmental benchmarking (LEB) method for the management of cutting tools
Tomelero, Roberto Luiz, Ferreira, João Carlos Espíndola, Kumar, Vikas and Garza-Reyes, Jose Arturo 2017. A lean environmental benchmarking (LEB) method for the management of cutting tools. International Journal of Production Research. https://doi.org/10.1080/00207543.2017.1293864Editorial: Seeing green: Achieving environmental sustainability through lean and six sigma
Garza-Reyes, Jose Arturo, Kumar, Vikas, Chen, Frank, F. and Wang, Yi-Chi 2017. Editorial: Seeing green: Achieving environmental sustainability through lean and six sigma. International Journal of Lean Six Sigma. https://doi.org/10.1108/IJLSS-01-2017-0005Barriers to innovation in service SMEs: Evidence from Mexico
Maldonado-Guzman, Gonzalo, Garza-Reyes, Jose Arturo, Pinzon-Castro, Sandra Yesenia and Kumar, Vikas 2017. Barriers to innovation in service SMEs: Evidence from Mexico. Industrial Management & Data Systems. https://doi.org/10.1108/IMDS-08-2016-0339Research Streams in the Scope of Circular Economy
Nadeem, S., Ming K. Lim, Garza-Reyes, J. and Anosike, T. 2017. Research Streams in the Scope of Circular Economy. CE2S Conference, The Circular Economy: Transitioning to Sustainability?. Coventry, UK Coventry University.Decision policy scenarios for just-in-sequence deliveries: A supply chain fluidity approach
Cedillo-Campos, Miguel Gaston, Morones Ruelas, Dario, Lizarraga-Lizarraga, Giovanni and Garza-Reyes, Jose Arturo 2017. Decision policy scenarios for just-in-sequence deliveries: A supply chain fluidity approach. Journal of Industrial Engineering and Management. 10 (4). https://doi.org/10.3926/jiem.2090Total quality environmental management: adoption status in the Chinese manufacturing sector
Jose Arturo Garza-Reyes, Mingyang Yu, Vikas Kumar and Arvind Upadhyay 2017. Total quality environmental management: adoption status in the Chinese manufacturing sector. The TQM Journal. https://doi.org/10.1108/tqm-05-2017-0052Towards a conceptual framework for Value Stream Mapping (VSM) implementation: An investigation of managerial factors
Andreadis, Eleftherios, Garza-Reyes, J. and Kumar, V. 2017. Towards a conceptual framework for Value Stream Mapping (VSM) implementation: An investigation of managerial factors. International Journal of Production Research. 55 (23), pp. 7073-7095. https://doi.org/10.1080/00207543.2017.1347302The effect of supply chain management practices on supply chain and manufacturing firms’ performance
Moh’d Anwer Radwan Al-Shboul, Kevin D. Barber, Jose Arturo Garza-Reyes, Vikas Kumar and M. Reza Abdi 2017. The effect of supply chain management practices on supply chain and manufacturing firms’ performance. Journal of Manufacturing Technology Management. https://doi.org/10.1108/jmtm-11-2016-0154A framework for the integration of green and lean six sigma for superior sustainability performance
Benhida, Khalid, Garza-Reyes, Jose Arturo, Govindan, Kannan, Elfezazi, Said, Cherrafi, Anass and Mokhlis, Ahmed 2016. A framework for the integration of green and lean six sigma for superior sustainability performance. International Journal of Production Research. https://doi.org/10.1080/00207543.2016.1266406Knowledge management as intellectual property: evidence from Mexican manufacturing SMEs
Madonado-Guzman, Gonzalo, Lopez-Torres, Gabriela Citlalli, Garza-Reyes, Jose Arturo, Kumar, Vikas and Martinez-Covarrubias, Juan Luis 2017. Knowledge management as intellectual property: evidence from Mexican manufacturing SMEs. Management Research Review. https://doi.org/10.1108/MRR-02-2015-0024How supplier selection criteria affects business performance? A study of UK automotive sector
Navasiri, Pabhavi, Kumar, Vikas, Garza-Reyes, Jose Arturo, Lim, Ming K. and Kumari, Archana 2016. How supplier selection criteria affects business performance? A study of UK automotive sector. Nottingham University Business School.The role of supply chain integration in achieving competitive advantage: A study of UK automobile manufacturers
Ngo, Hieu Van, Kumar, Vikas, Kumari, Archana, Garza-Reyes, Jose Arturo and Akkaranggoon, Supalak 2016. The role of supply chain integration in achieving competitive advantage: A study of UK automobile manufacturers.Measuring the level of lean readiness of the Hong Kong's manufacturing industry
Garza-Reyes, Jose Arturo, Wong, Kam-Kuen, Lim, Ming K. and Kumar, Vikas 2016. Measuring the level of lean readiness of the Hong Kong's manufacturing industry.A conceptual framework for the implementation of sustainability business processes
Gallotta, Bruno, Garza-Reyes, Jose Arturo, Anosike, Anthony, Lim, Ming K. and Roberts, Ian 2016. A conceptual framework for the implementation of sustainability business processes. Proceedings of the 27th Production and Operations Management Society (POMS).Lean and green in the transport and logistics sector: A case study of simultaneous deployment
Garza-Reyes, Jose Arturo, Villarreal, Bernardo, Kumar, Vikas and Ruiz, Patricia Molina 2016. Lean and green in the transport and logistics sector: A case study of simultaneous deployment. Production Planning and Control: The Management of Operations. https://doi.org/10.1080/09537287.2016.1197436Resolving forward-reverse logistics multi-period model using evolutionary algorithms
Kumar, Varun, Kumar, Vikas, Brady, Malcolm and Garza-Reyes, Jose Arturo 2016. Resolving forward-reverse logistics multi-period model using evolutionary algorithms. International Journal of Production Economics. https://doi.org/10.1016/j.ijpe.2016.04.026A Lean Six Sigma Framework for the Reduction of Ship Loading Commercial Time in the Iron Ore Pelletising Industry
Garza-Reyes, Jose Arturo, Al-Balushi, Mustafa, Antony, Jiju and Kumar, Vikas 2016. A Lean Six Sigma Framework for the Reduction of Ship Loading Commercial Time in the Iron Ore Pelletising Industry. Production Planning and Control: The Management of Operations. https://doi.org/10.1080/09537287.2016.1185188Investigating the green impact of Lean, Six Sigma, and Lean Six Sigma: a systematic literature review
Chugani, Nashmi, Kumar, Vikas, Garza-Reyes, Jose Arturo, Rocha-Lona, Luis and Upadhyay, Arvind 2017. Investigating the green impact of Lean, Six Sigma, and Lean Six Sigma: a systematic literature review. International Journal of Lean Six Sigma. https://doi.org/10.1108/IJLSS-11-2015-0043Lean and green – a systematic review of the state of the art literature
Garza-Reyes, Jose Arturo 2015. Lean and green – a systematic review of the state of the art literature. Journal of Cleaner Production. https://doi.org/10.1016/j.jclepro.2015.04.064Improving road transport operations through lean thinking: A case study
Villarreal, Bernardo, Garza-Reyes, Jose Arturo, Kumar, Vikas and Lim, Ming K. 2016. Improving road transport operations through lean thinking: A case study. International Journal of Logistics Research and Applications: A Leading Journal of Supply Chain Management.Lean road transportation – a systematic method for the improvement of road transport operations
Villarreal, Bernardo, Garza-Reyes, Jose Arturo and Kumar, Vikas 2016. Lean road transportation – a systematic method for the improvement of road transport operations. Production Planning & Control. https://doi.org/10.1080/09537287.2016.1152405